00191025-01 - 第534页
SIPLACE 80S/F/G User’s Manual 11 Station Extensions Edition 07/97 from S oftware Version SR.010.xx 11.2 Nozzle Changer for IC Head (ICPW20) 11 - 9 11.2 Nozzle Changer for IC Head (ICPW20) 11.2.1 Overview Fig. 11. 2.1 Loc…
11 Station Extensions SIPLACE 80S/F/G User’s Manual
11.1 Nozzle-Changer for Revolver Head Edition 07/97 from Software Version SR.010.xx
11 - 8
SIPLACE 80S/F/G User’s Manual 11 Station Extensions
Edition 07/97 from Software Version SR.010.xx 11.2 Nozzle Changer for IC Head (ICPW20)
11 - 9
11.2 Nozzle Changer for IC Head (ICPW20)
11.2.1 Overview
Fig. 11.2.1 Location where the nozzle changer for the IC head is installed
The nozzle changer is of modular design and consists of at least 1 but at most 4 magazines, each with
5 nozzle garages.
The magazines are placed on a shared carrier which is located in the area between the board conveyor and
the feed modules.
The individual magazines are fastened to the carrier by means of a countersunk screw in the central nozzle
garage.
The precise positioning of the magazines with respect to one another is regulated by means of two alignment
pins.
11 Station Extensions SIPLACE 80S/F/G User’s Manual
11.2 Nozzle Changer for IC Head (ICPW20) Edition 07/97 from Software Version SR.010.xx
11 - 10
11.2.2 Technical Data
11.2.3 How It Works
Fig. 11.2.2 Nozzle changer overview
Nozzle changer for IC head
Length 165 mm
Width 160 mm
Height 485 mm
Number of magazines min. 1 (standard) / max. 4
Number of nozzle garages min 5 / max. 20
Configurable nozzle types 416, 417, 418, 419
Material Vectra and steel