00191025-01 - 第550页

SIPLACE 80S/F/G User’s Manual 11 Station Extensions Edition 07/97 from S oftware Version SR.010.xx 11.6 Ceramic Substrate Centering 11 - 25 11.6 Cer amic Subs trate Cente ring 11.6.1 G eneral Ceramic s ubstrate c enterin…

11 Station Extensions SIPLACE 80S/F/G User’s Manual

11.5 Flip Chip Vision Module Edition 07/97 from Software Version SR.010.xx

11 - 24

11.5.2 Safety Information concerning the Components Vision Systems

in the 80F Machine

DANGER

∆

You must not modify or tamper with the safety devices of the 80F machine or of the IC or flip chip module in

any way at all!

The optical radiation of the IC and flip chip sensors corresponds to laser class 1 provided the sensors are per-

manently installed in the machine (EN 60825-1 and IEC 825).

Fig. 11.5.2 Identification label for Laser class 1

LASER CLASS1

SIPLACE 80S/F/G User’s Manual 11 Station Extensions

Edition 07/97 from Software Version SR.010.xx 11.6 Ceramic Substrate Centering

11 - 25

11.6 Ceramic Substrate Centering

11.6.1 General

Ceramic substrate centering is used for holding ceramic substrates securely in the x and y directions and with

the material being protected. Ceramic substrates can also be mounted right up to the edge of the substrate.

11.6.2 Changing from Ceramic Substrate to Board

●

Disconnect the pneumatic line and the electrical connecting line (see item 1 in Fig. 11.6.1).

●

Remove the ceramic substrate centering device (see item 2 in Fig. 11.6.1).

●

Remove the base of the ceramic substrate centering device (see item 3 in Fig. 11.6.2).

●

Remove the three clamping devices (see item 4 in Fig. 11.6.1), fitting the standard guide in their place.

●

Fit the retainer brackets (see item 5a and 5b in Fig. 11.6.1).

●

Set the size of the board (see item 6 in Fig. 11.6.1).

●

For operation under "Single functions" see also Section 6.4 "Transport Functions 80S" of this user's man-

ual.

11.6.3 Maintenance

The spherical rotating guide in the x centering unit must be cleaned and lubricated.

When necessary, check the pneumatic drive for ease of running.

Carry out maintenance of the conveyor as described in Section 9.3.2 PCB Handling.

11 Station Extensions SIPLACE 80S/F/G User’s Manual

11.6 Ceramic Substrate Centering Edition 07/97 from Software Version SR.010.xx

11 - 26

Fig. 11.6.1 Overall view, viewed from the top