00191025-01 - 第562页
SIPLACE 80S/F/G User’s Manual 15 Software Installation Edition 12/96 from S oftware Version SR.009.xx 15.1 Station Computer Software Vers ion from 8.x 15 - 7 Fig. 15.1.5 ● Use the c ursor keys to select w hether to con t…
15 Software Installation SIPLACE 80S/F/G User’s Manual
15.1 Station Computer Software Version from 8.x Edition 12/96 from Software Version SR.009.xx
15 - 6
Fig. 15.1.4
●
Use the cursor keys to select whether to continue with installation or to abort.
WARNING
∆
!
∆
!
All user data will be deleted. Save your user data on diskettes, if necessary.
●
Confirm pressing the Return key.
The installation procedure will be continued and the following display appears on the screen.
1. WARNING
SIPACE installation will only save files keeping machine data. All other files of user’s
interest have to be saved on floppy disc by user manually. Otherwise these files will be
deleted.
Continue SIPLACE Installation Job?
>>> -----------------------------Install Revision of SIPLACE Software
>>> ----- No
>>> ----- Yes
Use the [Up Arrow] [Down Arrow] [Pg Up] [Pg Dn] keys to move the highlight bar to select the
button you prefer.
Press [Enter] to activate your selection
SIPLACE 80S/F/G User’s Manual 15 Software Installation
Edition 12/96 from Software Version SR.009.xx 15.1 Station Computer Software Version from 8.x
15 - 7
Fig. 15.1.5
●
Use the cursor keys to select whether to continue with installation or to abort.
●
Confirm your choice by pressing the Return key.
WARNING
∆
!
∆
!
Partition C: will be formatted. All data will now be deleted.
●
Reinstallation will be continued.
●
You will be asked to insert each of the remaining disks in turn into the drive (see illustration below).
2. WARNING
Partition "C:" of your hard disc will be formatted:
⇒
all files will be deleted.
Continue SIPLACE Installation Job?
>>> -----------------------------Install Revision of SIPLACE Software
>>> ----- No
>>> ----- Yes
Use the [Up Arrow] [Down Arrow] [Pg Up] [Pg Dn] keys to move the highlight bar to select the
button you prefer.
Press [Enter] to activate your selection
15 Software Installation SIPLACE 80S/F/G User’s Manual
15.1 Station Computer Software Version from 8.x Edition 12/96 from Software Version SR.009.xx
15 - 8
Fig. 15.1.6
●
Once the final disk has been used in the installation, the following display will appear on the screen:
Fig. 15.1.7
PRESS ANY KEY
Please insert the disk labeled
"Disk #2"
for SIPLACE Version SI80X.007.xxx:
into drive A and close the drive door.
Installation terminated
Please remove installation disc and switch off SIPLACE machine
SIPLACE
SIEMENS AG
***
INSTALLATION
SI80X007.xxx