00191025-01 - 第664页
SIPLACE 80S/F/G User’s Manual 19 Error Message s Edition 12/96 from S oftware Version SR.009.xx 19.1 Error Messages 19 - 77 715 BO: Error in paus e (sts) CAUSE ● Syste m error du ring sys tem call PAUSE. REMEDY ● When th…
19 Error Messages SIPLACE 80S/F/G User’s Manual
19.1 Error Messages Edition 12/96 from Software Version SR.009.xx
19 - 76
708 CRDL 2 without mechanical centering configured
CAUSE
●
Despite the CRDL tester, the mechanical centering station has not been configured (tester without
mechanical centering station is not possible)
REMEDY
●
Correct the configuration in the line computer for this station.
709 BO: Event flag ID unknown (flag id)
CAUSE
●
System error during system call SVC-Look for event flag group of the keyboard task
REMEDY
●
When the machine is at a standstill, reset the machine.
710 BO: Error in RIO. HSFS_XREAD (sts)
CAUSE
●
System error during keyboard input.
REMEDY
●
When the machine is at a standstill, reset the machine.
711 BO: 1st status byte HSFS_XREAD (status[0])
CAUSE
●
System error during keyboard input.
REMEDY
●
When the machine is at a standstill, reset the machine.
712 BO: Error in RIO POLL_XBUF (sts)
CAUSE
●
System error during keyboard input.
REMEDY
●
When the machine is at a standstill, reset the machine.
713 BO: 1st status byte POLL_XBUF (status[0])
CAUSE
●
System error during keyboard input.
REMEDY
●
When the machine is at a standstill, reset the machine.
714 NF: no memory available
CAUSE
●
System error
REMEDY
●
Reboot
SIPLACE 80S/F/G User’s Manual 19 Error Messages
Edition 12/96 from Software Version SR.009.xx 19.1 Error Messages
19 - 77
715 BO: Error in pause (sts)
CAUSE
●
System error during system call PAUSE.
REMEDY
●
When the machine is at a standstill, reset the machine.
716 BO Barcode terminator not found
CAUSE
●
The terminator is missing after the barcode header, barcode at the barcode pen not recognized.
REMEDY
●
Reread the barcode. If this does not work, check the barcode header and terminator.
717 BO: 1st character of barcode terminator not found
CAUSE
●
The terminator is missing after the barcode header, barcode at the barcode pen not recognized.
REMEDY
●
Reread the barcode. If this does not work, check the barcode header and terminator.
718 VS: Unknown message code
CAUSE
●
Software error
REMEDY
●
Inform Development; possibly reboot.
719 VS: Error during system call look
CAUSE
●
Software error
REMEDY
●
Inform Development; possibly reboot.
720 VS: File could not be opened
CAUSE
●
File does not exist in the station computer
REMEDY
●
Reinstall software
721 VS: Error in fiducial data
CAUSE
●
Fiducial data erroneous; obsolete ICOS version
REMEDY
●
Reset ICOS, update eproms
19 Error Messages SIPLACE 80S/F/G User’s Manual
19.1 Error Messages Edition 12/96 from Software Version SR.009.xx
19 - 78
722 VS: Error during memory request
CAUSE
●
Software error
REMEDY
●
Reboot; inform Development.
723 VS: File could not be opened
CAUSE
●
File does not exist in the station computer (TISCH.HEX)
REMEDY
●
Reinstall software (possibly only TISCH.HEX)
724 VS: Error during memory request
CAUSE
●
Not enough memory available in the station computer
REMEDY
●
Reset station computer
725 VS: Error during memory release in VS load
CAUSE
●
Software error
REMEDY
●
Inform Development.
726 VS: Error in message reception
CAUSE
●
Software error
REMEDY
●
Inform Development; possibly reboot.
727 VS: Error in send function in SC
CAUSE
●
Software error
REMEDY
●
Inform Development; possibly reboot.
728 VS: Unknown state
CAUSE
●
Software error
REMEDY
●
Inform Development; possibly reboot.