00191025-01 - 第678页

SIPLACE 80S/F/G User’s Manual 19 Error Message s Edition 12/96 from S oftware Version SR.009.xx 19.1 Error Messages 19 - 91 810 KLKONF: System error during send mes sage CAUSE ● Softwar e error in gl ueing co nfiguration…

100%1 / 736
19 Error Messages SIPLACE 80S/F/G User’s Manual
19.1 Error Messages Edition 12/96 from Software Version SR.009.xx
19 - 90
803 BO: Insufficient memory for postponement (length)
CAUSE
●
No memory available.
REMEDY
●
Reset station.
804 BO: POOL cannot be given back (length);
CAUSE
●
A requested memory area can no longer be returned, system error.
REMEDY
●
Reset station.
805 BO: Message cannot be sent (state/code)
CAUSE
●
Error during system call "send" or not enough memory available.
REMEDY
●
Reset station.
806 NF: unexpected input
CAUSE
●
System error
REMEDY
●
If possible, ignore
807 KLKONF: System error during initialization
CAUSE
●
Software error in glueing configuration task
REMEDY
●
Reboot
808 KLKONF: System error during memory request
CAUSE
●
Software error in glueing configuration task during memory request
REMEDY
●
Reboot
809 KLKONF: System error during give back memory
CAUSE
●
Software error in glueing configuration task during give back memory
REMEDY
●
Reboot
SIPLACE 80S/F/G User’s Manual 19 Error Messages
Edition 12/96 from Software Version SR.009.xx 19.1 Error Messages
19 - 91
810 KLKONF: System error during send message
CAUSE
●
Software error in glueing configuration task during send message
REMEDY
●
Reboot
811 KLKONF: Incorrect input
CAUSE
●
Software error in glueing configuration task; Incorrect message received
REMEDY
●
Reboot
812 KLKONF: Invalid input data
CAUSE
●
Software error in glueing configuration task; Incorrect data received from data preparation
REMEDY
●
Reboot; get the data organized
813 WARNING: Glue data from file ".ZKL" invalid
CAUSE
●
1. No *.ZKL can be found (with glueing parameters which have not yet been manipulated).
2. Data from "ZKL" incorrect.
REMEDY
●
To 1. Not an error
To 2. Delete *.ZKL, manipulate, then a new *.ZKL will be created.
814 Glueing data cannot be modified
CAUSE
●
Software error
REMEDY
●
Reboot
815 DP: Incorrect operating system call
CAUSE
●
Software error
REMEDY
●
AUT 5V Service or AUT 5 BSM14 (Development) should be notified.
816 DP: No LC command in service without LC
CAUSE
●
Machine in "service without line computer" but all the same command received via IEC bus.
REMEDY
●
Machines and line configuration should be checked.
19 Error Messages SIPLACE 80S/F/G User’s Manual
19.1 Error Messages Edition 12/96 from Software Version SR.009.xx
19 - 92
817 DP: Set-up without valid machine data
CAUSE
●
Incorrect data supply from the line computer.
REMEDY
●
Data supply from the line computer should be checked.
818 DP: Cluster without valid set-up data
CAUSE
●
Incorrect data supply from the line computer.
REMEDY
●
Data supply from the line computer should be checked.
819 DP: Package form without valid set-up data
CAUSE
●
Incorrect data supply from the line computer.
REMEDY
●
Data supply from the line computer should be checked.
820 DP: Delete package form without valid set-up data
CAUSE
●
Incorrect data supply from the line computer.
REMEDY
●
Data supply from the line computer should be checked.
821 DP: Set-up and cluster without valid machine data
CAUSE
●
Incorrect data supply from the line computer.
REMEDY
●
Data supply from the line computer should be checked.
822 DP: Error in the data supply from LC
CAUSE
●
Incorrect data supply from the line computer.
REMEDY
●
Data supply from the line computer should be checked.
823 DP: Invalid request from Visiontask
CAUSE
●
Software error in operation DP with vision system
REMEDY
●
Reboot