00191025-01 - 第700页

SIPLACE 80S/F/G User’s Manual 19 Error Message s Edition 12/96 from S oftware Version SR.009.xx 19.1 Error Messages 19 - 1 13 1041 Y axis: Timeou t CAUSE ● Axis doe s not reach position wi thin the spec ified tim e; axis…

100%1 / 736
19 Error Messages SIPLACE 80S/F/G User’s Manual
19.1 Error Messages Edition 12/96 from Software Version SR.009.xx
19 - 112
1035 xk axis: deactivated
CAUSE
●
Axis has been deactivated at the axis board (servo)
REMEDY
●
Switch on the axis at the axis card
1036 yk axis: deactivated
CAUSE
●
Axis has been deactivated at the axis board (servo)
REMEDY
●
Switch on the axis at the axis card
1037 z axis; GU1: deactivated
CAUSE
●
Axis has been deactivated at the axis board (servo)
REMEDY
●
Switch on the axis at the axis card
1038 z axis; GU2: deactivated
CAUSE
●
Axis has been deactivated at the axis board (servo)
REMEDY
●
Switch on the axis at the axis card
1039 z axis; GU3: deactivated
CAUSE
●
Axis has been deactivated at the axis board (servo)
REMEDY
●
Switch on the axis at the axis card
1040 X axis: Timeout
CAUSE
●
Axis does not reach position within the specified time; axis setting is not correct; machine data not
correct; drive motor, tachometer, incremental encoder, servo-amplifier defective;
mechanism is jamming
REMEDY
●
Check the axis calibration; check machine data; or check the components; if necessary, replace;
check the mechanism;
SIPLACE 80S/F/G User’s Manual 19 Error Messages
Edition 12/96 from Software Version SR.009.xx 19.1 Error Messages
19 - 113
1041 Y axis: Timeout
CAUSE
●
Axis does not reach position within the specified time; axis setting is not correct; machine data not
correct; drive motor, tachometer, incremental encoder, servo-amplifier defective;
mechanism is jamming
REMEDY
●
Check the axis calibration; check machine data; or check the components; if necessary, replace;
check the mechanism;
1042 xk axis: Timeout
CAUSE
●
Axis does not reach position within the specified time; axis setting is not correct; machine data not
correct; drive motor, tachometer, incremental encoder, servo-amplifier defective;
mechanism is jamming
REMEDY
●
Check the axis calibration; check machine data; or check the components; if necessary, replace;
check the mechanism;
1043 yk axis: Timeout
CAUSE
●
Axis does not reach position within the specified time; axis setting is not correct; machine data not
correct; drive motor, tachometer, incremental encoder, servo-amplifier defective;
mechanism is jamming
REMEDY
●
Check the axis calibration; check machine data; or check the components; if necessary, replace;
check the mechanism;
1044 z axis; GU1: Timeout
CAUSE
●
Axis does not reach position within the specified time; axis setting is not correct; machine data not
correct; drive motor, tachometer, incremental encoder, servo-amplifier defective;
mechanism is jamming.
REMEDY
●
Check the axis calibration; check machine data; or check the components; if necessary, replace;
check the mechanism;
1045 z axis; GU2: Timeout
CAUSE
●
Axis does not reach position within the specified time; axis setting is not correct; machine data not
correct; drive motor, tachometer, incremental encoder, servo-amplifier defective;
mechanism is jamming.
REMEDY
●
Check the axis calibration; check machine data; or check the components; if necessary, replace;
check the mechanism;
19 Error Messages SIPLACE 80S/F/G User’s Manual
19.1 Error Messages Edition 12/96 from Software Version SR.009.xx
19 - 114
1046 z axis; GU3: Timeout
CAUSE
●
Axis does not reach position within the specified time; axis setting is not correct; machine data not
correct; drive motor, tachometer, incremental encoder, servo-amplifier defective;
mechanism is jamming.
REMEDY
●
Check the axis calibration; check machine data; or check the components; if necessary, replace;
check the mechanism;
1047 X axis: target position outside of travel range
CAUSE
●
The measurement of the head references does not match the travel range of the x axis.
REMEDY
●
Remeasure the head references; remeasure the minimum/maximum positions of the axis.
1048 Y axis: target position outside of travel range
CAUSE
●
The measurement of the head references does not match the travel range of the y axis.
REMEDY
●
Remeasure the head references; remeasure the minimum/maximum positions of the axis.
1049 xk axis: target position outside of travel range
CAUSE
●
The measurement of the head references does not match the travel range of the xk axis
REMEDY
●
Remeasure the head references; remeasure the minimum/maximum positions of the axis
1050 yk axis: target position outside of travel range
CAUSE
●
The measurement of the head references does not match the travel range of the yk axis
REMEDY
●
Remeasure the head references; remeasure the minimum/maximum positions of the yk axis
1051 z axis; GU1: target position outside of travel range
CAUSE
●
The minimum/maximum positions of the z1 axis are not correct; height of the head is not correct
REMEDY
●
Adjust the minimum/maximum positions and zero point correction correctly; specify the head height
correctly.