00191025-01 - 第703页

19 Error Messages S IPLACE 80S/F/G User’s Manual 19.1 Error Mess ages Edition 12/96 from Software Vers ion SR.009.xx 19 - 116 1058 Y axis error: invalid command CAUSE ● Software error; shou ld not occur REMEDY ● 1059 xk …

100%1 / 736
SIPLACE 80S/F/G User’s Manual 19 Error Messages
Edition 12/96 from Software Version SR.009.xx 19.1 Error Messages
19 - 115
1052 z axis; GU2: target position outside of travel range
CAUSE
●
The minimum/maximum positions of the z2 axis are not correct; height of the head is not correct
REMEDY
●
Adjust the minimum/maximum positions and zero point correction correctly; specify the head height
correctly.
1053 z axis; GU3: target position outside of travel range
CAUSE
●
The minimum/maximum positions of the z3 axis are not correct; height of the head is not correct
REMEDY
●
Adjust the minimum/maximum positions and zero point correction correctly; specify the head height
correctly.
1054 z axis; GU1: BERO for position monitoring off
CAUSE
●
When the gantry moves the z1 axis is not at the top; alignment of the Bero is faulty; Bero is defective
axis is jamming; motor, controller, servo defective
REMEDY
●
Inspect and if necessary repair or replace the components just mentioned
1055 z axis; GU2: BERO for position monitoring off
CAUSE
●
When the gantry moves the z2 axis is not at the top; alignment of the Bero is faulty; Bero is defective
axis is jamming; motor, controller, servo defective
REMEDY
●
Inspect and if necessary repair or replace the components just mentioned
1056 z axis; GU3: BERO for position monitoring off
CAUSE
●
When the gantry moves the z3 axis is not at the top; alignment of the Bero is faulty; Bero is defective
axis is jamming; motor, controller, servo defective
REMEDY
●
Inspect and if necessary repair or replace the components just mentioned
1057 X axis error: invalid command
CAUSE
●
Software error; should not occur
REMEDY
●
19 Error Messages SIPLACE 80S/F/G User’s Manual
19.1 Error Messages Edition 12/96 from Software Version SR.009.xx
19 - 116
1058 Y axis error: invalid command
CAUSE
●
Software error; should not occur
REMEDY
●
1059 xk axis error: invalid command
CAUSE
●
Software error; should not occur
REMEDY
●
1060 yk axis error: invalid command
CAUSE
●
Software error; should not occur
REMEDY
●
1061 z axis error; GU1: invalid command
CAUSE
●
Software error; should not occur
REMEDY
●
1062 z axis error; GU2: invalid command
CAUSE
●
Software error; should not occur
REMEDY
●
1063 z axis error; GU3: invalid command
CAUSE
●
Software error; should not occur
REMEDY
●
1064 X axis error: Handshake faulty
CAUSE
●
Software error; should not occur
REMEDY
●
SIPLACE 80S/F/G User’s Manual 19 Error Messages
Edition 12/96 from Software Version SR.009.xx 19.1 Error Messages
19 - 117
1065 Y axis error: Handshake faulty
CAUSE
●
Software error; should not occur
REMEDY
●
1066 xk axis error: Handshake faulty
CAUSE
●
Software error; should not occur
REMEDY
●
1067 yk axis error: Handshake faulty
CAUSE
●
Software error; should not occur
REMEDY
●
1068 z axis error; GU1: Handshake faulty
CAUSE
●
Software error; should not occur
REMEDY
●
1069 z axis error; GU2: Handshake faulty
CAUSE
●
Software error; should not occur
REMEDY
●
1070 z axis error; GU3: Handshake faulty
CAUSE
●
Software error; should not occur
REMEDY
●
1071 X axis error: deactivated
CAUSE
●
Axis has been deactivated at the axis board (servo)
REMEDY
●
Switch the axis on at the axis board