00191025-01 - 第709页

19 Error Messages S IPLACE 80S/F/G User’s Manual 19.1 Error Mess ages Edition 12/96 from Software Vers ion SR.009.xx 19 - 122 1099 X axis error: targ et position outside of tra vel range CAUSE ● Program error; sh ould no…

100%1 / 736
SIPLACE 80S/F/G User’s Manual 19 Error Messages
Edition 12/96 from Software Version SR.009.xx 19.1 Error Messages
19 - 121
1092 X axis error: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1093 Y axis error: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1094 xk axis error: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1095 yk axis error: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1096 z axis error; GU1: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1097 z axis error; GU2: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
1098 z axis error; GU3: limit switch actuated
CAUSE
●
The axis is located at the limit switch or limit switch was actuated
REMEDY
●
Slide the axis away from the limit switch and re-reference; switch the machine off and back on again
19 Error Messages SIPLACE 80S/F/G User’s Manual
19.1 Error Messages Edition 12/96 from Software Version SR.009.xx
19 - 122
1099 X axis error: target position outside of travel range
CAUSE
●
Program error; should not occur
REMEDY
●
1100 Y axis error: target position outside of travel range
CAUSE
●
Program error; should not occur
REMEDY
●
1101 xk axis error: target position outside of travel range
CAUSE
●
Program error; should not occur
REMEDY
●
1102 yk axis error: target position outside of travel range
CAUSE
●
Program error; should not occur
REMEDY
●
1103 z axis error; GU1: target position outside of travel range
CAUSE
●
Program error; should not occur
REMEDY
●
1104 z axis error; GU2: target position outside of travel range
CAUSE
●
Program error; should not occur
REMEDY
●
1105 z axis error; GU3: target position outside of travel range
CAUSE
●
Program error; should not occur
REMEDY
●
SIPLACE 80S/F/G User’s Manual 19 Error Messages
Edition 12/96 from Software Version SR.009.xx 19.1 Error Messages
19 - 123
1106 X axis error: incorrect character
CAUSE
●
Program error; should not occur
REMEDY
●
1107 Y axis error: incorrect character
CAUSE
●
Program error; should not occur
REMEDY
●
1108 xk axis error: incorrect character
CAUSE
●
Program error; should not occur
REMEDY
●
1109 yk axis error: incorrect character
CAUSE
●
Program error; should not occur
REMEDY
●
1110 z axis error; GU1: incorrect character
CAUSE
●
Program error; should not occur
REMEDY
●
1111 z axis error; GU2: incorrect character
CAUSE
●
Program error; should not occur
REMEDY
●
1112 z axis error; GU3: incorrect character
CAUSE
●
Program error; should not occur
REMEDY
●