00191025-01 - 第83页
SIPLACE 80S/F/G User’s Manual 5 Placement Edition 12/96 from S oftware Version SR.009.xx 5.3 Options 5 - 7 5.3 Opti ons 5.3.1 Machine Options With the "operator” u ser class it is possi ble to find ou t from the men…
5 Placement SIPLACE 80S/F/G User’s Manual
5.2 Loading Cluster Data Edition 12/96 from Software Version SR.009.xx
5 - 6
The data are now loaded and the main menu appears. In the second box of the main menu the name of the
cluster and of the set-up are displayed.
●
Press the
Esc key
if you wish to quit the menu without executing an input.
5.2.2 Changing Clusters
Fig. 5.2.2
●
If you wish to change the cluster, use the
cursor keys
to position the cursor bar over the menu item "New
cluster".
●
When the menu item "New cluster" is shown in inverse video, press the
Return key
.
The menu "New cluster" appears on the screen, as shown in Section 5.2.1.
●
Using the keyboard, enter the name of the new cluster.
●
Confirm the input using the
Return key
("State" Wait for data).
The data are loaded and the main menu appears on the screen. The name of the new cluster is shown in
the second box of the main menu.
SI 80 V9.x
Cluster:
Set-up :
Component feeding Display errors
Confirm errors
Machine options
Software options
Single functions
Vision system
Error
State
Action
:
:
: New cluster ...
New cluster
Wait for data
TEST
TEST
SIPLACE 80S/F/G User’s Manual 5 Placement
Edition 12/96 from Software Version SR.009.xx 5.3 Options
5 - 7
5.3 Options
5.3.1 Machine Options
With the "operator” user class it is possible to find out from the menu "Machine options” which machine
options have been activated.
In the menu "Machine options" you have the possibility, once the line engineer password has been entered,
of switching sub-functions of the machine ON or OFF.
Using the
cursor keys
select the menu item "Machine options" within the main menu to call up the menu
"Machine options." Then press the
Return key
. The menu "Machine options" is then shown on the screen.
Fig. 5.3.1
Press the
Esc key
to quit the menu. The program returns to the main menu.
To change function states proceed as follows (once the line engineer password has been entered):
●
Using the
cursor keys
position the cursor bar over the function which to be manipulated.
●
Press the
spacebar
to change the state (active = (X), not active = ( ) ) of the function.
●
Press the
Return key
to accept the input.
NOTE
The menu only displays functions which have been configured in the machine data.
SI 80 V 9.x
Nutzen:
Rüstung :
Single functions
Vision system
Error
State
Action
:
:
:
Machine options
Placement
Position recognition
Ink spot check
Optical centering 1
Optical centering 2
Mechanical centering 1
Mechanical centering 2
Interface blocked
( X )
( X )
( )
( )
( )
( )
( )
( X )
Esc: abort Blank: select Ret: input
Refill check
( X )
Coplanarity (80F only)( )
( )
( )
Conveyor position recognition
Ceramic substrate centering
5 Placement SIPLACE 80S/F/G User’s Manual
5.3 Options Edition 12/96 from Software Version SR.009.xx
5 - 8
5.3.1.1 Optical Component Centering
The SIPLACE 80 S placement machine is equipped with a camera at each placement head for centering the
components. The position of the components at the nozzles is measured with this camera and the placement
position corrected correspondingly. The optical components centering can be activated and deactivated after
the line engineer password has been entered in the menu "Machine options".
5.3.1.2 CRDL Test (Option)
The SIPLACE 80 S placement machine includes an option for testing components for type, polarity and value
through installation of a mechanical centering station in conjunction with an evaluation unit. The CRDL test
can be activated or deactivated in the "Machine options" menu after entering the line engineer password.
5.3.1.3 Coplanarity Laser Module (80F Option)
The SIPLACE 80 F placement machine includes an option for recognizing bent or missing leads of compo-
nents and of discarding them.