00191025-01 - 第90页
5 Placement SIPLACE 80S /F/G User’s Manual 5.4 Component Handling Ed ition 12/96 from Software Version SR.009.xx 5 - 14 Input Options Lefthand wi ndow: - Track barc ode: Input of the track bar -code using th e bar-cod e …
SIPLACE 80S/F/G User’s Manual 5 Placement
Edition 12/96 from Software Version SR.009.xx 5.4 Component Handling
5 - 13
5.4.4 Menu "Refill"
If you have selected the menu item "Refill" in the menu "Component feeding", the "Refill" menu appears on the
screen.
In this menu all inputs connected with track assignment are carried out. You can use the barcode reader
(option) or the keyboard to make the inputs.
Key Functions:
-
Esc key:
This key is used to return to the "Component feeding" menu.
-
Return key:
With this key the inputs are taken over and the track which has been checked
(it is highlighted by a yellow background) is set to full. Tracks which have not been
checked are set to empty.
-
Spacebar:
Using this key a line can be selected in the righthand window of the refill menu.
-
Tab key:
Using this key you can move between the two windows.
-
Cursor keys:
Using these keys the cursor bar can be moved within the selected window.
Fig. 5.4.2
BC
1. BC + filter:
4. BC + filter:
2. BC + filter:
3. BC + filter:
5. BC + filter:
6. BC + filter:
12 1 0
CO-R12534 *
33 1 0
CO-R12534 -
69 1 0
CO-R12534 *
48 1 0
CO-R12534 -
2007
TRX-7
TRY-3
Y-7
B-7
TRX-8
TRA-7
02
08
03
04
07
04
Error
State
Action
:
:
:
Fill empty tracks separately and continue
ESC: abort Ret. input Blank: select Tab: change wind
Track barcode:
Comp barcode:
Refill
Level Comp nameDivTrackLoc
5 Placement SIPLACE 80S/F/G User’s Manual
5.4 Component Handling Edition 12/96 from Software Version SR.009.xx
5 - 14
Input Options
Lefthand window:
-
Track barcode:
Input of the track bar-code using the bar-code pen by running it over the
track bar-code at the machine or by using the keyboard to enter the track bar-code.
-
Des'd BC w. filt:
Possible bar-codes are shown here.
If a filter was entered in the LC for certain positions in the barcode this will be
shown here. The masked-out positions are marked by a rectangle.
-
Comp. barcode:
Input of component barcode by reading in the barcode on the component package
or by entering the component barcode via keyboard.
Righthand window:
-
Displays the table side, track number and component name belonging to the track barcode selected.
-
Listing the empty tracks when the "Refill" menu is called during placement. In this listing it is possible to
display, by pressing the
spacebar
, the track barcode belonging to the line which was selected with the
cur-
sor bar
.
When the refill check is not enabled (see Chapter 5.3 "Options") it is possible to call the corresponding
component barcode by pressing the spacebar once more.
-
BC:
* With this track at least one component bar-code will be present. Bar-code comparison is possible.
When fill check is enabled the bar-code comparison is mandatory.
- This component bar-code is not found. You can fill manually.
NOTE
Up to 40 characters may be entered as a component barcode. The display can be scrolled in the display area
Component barcode with filter. Arrows indicate in which direction the characters in the display area should be
read.
5.4.4.1 Setting Tracks Full
●
Read in or enter the track bar-code and then the component bar-code of the track to be dealt with.
●
Press the
Return key
or move the
pen reader
over the return barcode. If the track and the component bar-
code agree with one another, the corresponding line in the righthand window is highlighted by a yellow
background. If the track and component barcodes do not agree with one another, a warning message is
displayed.
SIPLACE 80S/F/G User’s Manual 5 Placement
Edition 12/96 from Software Version SR.009.xx 5.4 Component Handling
5 - 15
Fig. 5.4.3
●
Acknowledge the warning message by pressing the
spacebar
.
●
Check your inputs and whether you have entered the right component. Repeat the procedure.
●
If the corresponding line in the righthand field has a yellow background, press the
Return key
.
This line is deleted from the righthand window and this track reported to the machine as full and ready for
placement.
5.4.4.2 Refilling Tracks Which Have Not Yet Been Emptied
If tapes are spliced onto tracks which have not yet been emptied, or they are refilled with components, then
proceed as follows to check whether the track corresponds to the component which has been supplied:
●
Select the "Refill" menu.
●
For the track affected, follow the procedure described in Section 5.4.4.1 (Setting tracks full).
Error
State
Action
:
:
:
Fill empty tracks separately and continue
2007
TRX-7
Y-7
02
03
TRY-3
ESC: abort Ret. input Blank: select Tab: change wind
1. BC + filter:
4. BC + filter:
2. BC + filter:
3. BC + filter:
5. BC + filter:
6. BC + filter:
Track barcode:
Comp barcode:
BC
12 1 0
CO-R12534 *
33 1 0
CO-R12534 -
48 1 0
CO-R12534 -
Refill
Level Comp nameDivTrackLoc
WARNING
Track and comp. barcode do not match
Press space bar