00191025-01 - 第92页

5 Placement SIPLACE 80S /F/G User’s Manual 5.4 Component Handling Ed ition 12/96 from Software Version SR.009.xx 5 - 16 5.4.4. 3 S etting Empty Tracks Ful l If one or m ore tracks has or have been com pletely emp tied an…

SIPLACE 80S/F/G User’s Manual 5 Placement

Edition 12/96 from Software Version SR.009.xx 5.4 Component Handling

5 - 15

Fig. 5.4.3

●

Acknowledge the warning message by pressing the

spacebar

●

Check your inputs and whether you have entered the right component. Repeat the procedure.

●

If the corresponding line in the righthand field has a yellow background, press the

Return key

This line is deleted from the righthand window and this track reported to the machine as full and ready for

placement.

5.4.4.2 Refilling Tracks Which Have Not Yet Been Emptied

If tapes are spliced onto tracks which have not yet been emptied, or they are refilled with components, then

proceed as follows to check whether the track corresponds to the component which has been supplied:

●

Select the "Refill" menu.

●

For the track affected, follow the procedure described in Section 5.4.4.1 (Setting tracks full).

Error

State

Action

Fill empty tracks separately and continue

2007

TRX-7

Y-7

TRY-3

ESC: abort Ret. input Blank: select Tab: change wind

1. BC + filter:

4. BC + filter:

2. BC + filter:

3. BC + filter:

5. BC + filter:

6. BC + filter:

Track barcode:

Comp barcode:

12 1 0

CO-R12534 *

33 1 0

CO-R12534 -

48 1 0

CO-R12534 -

Refill

Level Comp nameDivTrackLoc

WARNING

Track and comp. barcode do not match

Press space bar

5 Placement SIPLACE 80S/F/G User’s Manual

5.4 Component Handling Edition 12/96 from Software Version SR.009.xx

5 - 16

5.4.4.3 Setting Empty Tracks Full

If one or more tracks has or have been completely emptied and appear as an error message on the screen,

then proceed using one of the two alternatives given below:

With refill check

●

Select the "Refill" menu. All empty tracks are listed there automatically in the righthand window.

●

Using the

Tab key

activate the cursor bar in the righthand window.

●

Either position the cursor bar using the

cursor keys

over the track you wish to process and press the

spacebar

or read in the track barcode using the pen reader. The track barcode is now shown in the

lefthand window.

●

Read in or enter one of the possible component bar-codes and then press the

Return key

●

If the corresponding line in the righthand field has a yellow background, press the

Return key

This line is deleted from the screen and this track is reported to the machine as full and ready for

placement.

NOTE

If "No component barcode (- in column BC)" has been entered for the selected track, you may proceed as

with "without refill check".

Without refill check

●

Select the "Refill menu". All empty tracks are listed there automatically in the righthand window.

●

Using the

Tab key

activate the cursor bar in the righthand window.

●

Either position the cursor bar using the

cursor keys

over the track you wish to process and press the

spacebar

or read in the track barcode using the pen reader. The track barcode is now displayed in the

lefthand window.

●

Press the

spacebar

again. In the lefthand window the first of the corresponding component bar codes will

now be displayed.

●

Press the

Return key

. This line is deleted from the screen and this track reported to the machine as full and

ready for placement.

NOTE

All empty tracks can also be set simultaneously to full after entering the line engineer password with the

menu item "Set tracks full" (see Section 5.4.3). The refill check also must be disabled.

SIPLACE 80S/F/G User’s Manual 5 Placement

Edition 12/96 from Software Version SR.009.xx 5.4 Component Handling

5 - 17

NOTE

The refill check can only be activated or deactivated after the

line engineer password

has been entered in

the menu "Software options".

5.4.4.4 Setting Filled Tracks Empty

●

Select the "Refill" menu.

●

Read in or enter the track barcode of the relevant track.

●

Press the

Return key

. The track is now reported as empty to the machine and will not be approached by

the placement head for component removal.

●

To fill the track proceed as described in Section 5.4.4.1.

5.4.5 Machine Set-Up

●

Position the feeder modules on the components tables in accordance with the specified set-up. You should

comply with the instructions provided in Section 8 "Component Supply".

●

The set-up is displayed in the submenu "Display set-up", Section 5.4.6.2.

●

In the case of a newly specified set-up all tracks will automatically be set to "full" and all track errors

deleted.