00191025-01 - 第93页

SIPLACE 80S/F/G User’s Manual 5 Placement Edition 12/96 from S oftware Version SR.009.xx 5.4 Com ponent Handling 5 - 17 NOTE The refil l check can only be a ctivated or deactivate d after the line eng ineer pass word has…

5 Placement SIPLACE 80S/F/G User’s Manual

5.4 Component Handling Edition 12/96 from Software Version SR.009.xx

5 - 16

5.4.4.3 Setting Empty Tracks Full

If one or more tracks has or have been completely emptied and appear as an error message on the screen,

then proceed using one of the two alternatives given below:

With refill check

●

Select the "Refill" menu. All empty tracks are listed there automatically in the righthand window.

●

Using the

Tab key

activate the cursor bar in the righthand window.

●

Either position the cursor bar using the

cursor keys

over the track you wish to process and press the

spacebar

or read in the track barcode using the pen reader. The track barcode is now shown in the

lefthand window.

●

Read in or enter one of the possible component bar-codes and then press the

Return key

●

If the corresponding line in the righthand field has a yellow background, press the

Return key

This line is deleted from the screen and this track is reported to the machine as full and ready for

placement.

NOTE

If "No component barcode (- in column BC)" has been entered for the selected track, you may proceed as

with "without refill check".

Without refill check

●

Select the "Refill menu". All empty tracks are listed there automatically in the righthand window.

●

Using the

Tab key

activate the cursor bar in the righthand window.

●

Either position the cursor bar using the

cursor keys

over the track you wish to process and press the

spacebar

or read in the track barcode using the pen reader. The track barcode is now displayed in the

lefthand window.

●

Press the

spacebar

again. In the lefthand window the first of the corresponding component bar codes will

now be displayed.

●

Press the

Return key

. This line is deleted from the screen and this track reported to the machine as full and

ready for placement.

NOTE

All empty tracks can also be set simultaneously to full after entering the line engineer password with the

menu item "Set tracks full" (see Section 5.4.3). The refill check also must be disabled.

SIPLACE 80S/F/G User’s Manual 5 Placement

Edition 12/96 from Software Version SR.009.xx 5.4 Component Handling

5 - 17

NOTE

The refill check can only be activated or deactivated after the

line engineer password

has been entered in

the menu "Software options".

5.4.4.4 Setting Filled Tracks Empty

●

Select the "Refill" menu.

●

Read in or enter the track barcode of the relevant track.

●

Press the

Return key

. The track is now reported as empty to the machine and will not be approached by

the placement head for component removal.

●

To fill the track proceed as described in Section 5.4.4.1.

5.4.5 Machine Set-Up

●

Position the feeder modules on the components tables in accordance with the specified set-up. You should

comply with the instructions provided in Section 8 "Component Supply".

●

The set-up is displayed in the submenu "Display set-up", Section 5.4.6.2.

●

In the case of a newly specified set-up all tracks will automatically be set to "full" and all track errors

deleted.

5 Placement SIPLACE 80S/F/G User’s Manual

5.4 Component Handling Edition 12/96 from Software Version SR.009.xx

5 - 18

5.4.6 Location Functions

If you have selected the menu item "Locations 1-4" in the "Component feeding" menu, the "Locations 1 - 4"

menu will appear on the screen.

Fig. 5.4.4

5.4.6.1 Set Location Full

In this menu locations 1 - 4 can be set individually to "full”.

Here the fixed table 1 corresponds to location 1 and fixed table 2 to location 3.

5.4.6.2 Display Set-up

If a set-up exists, the set-up can be displayed for each location in this menu.

SI 80 V 9.x

Cluster:

Rüstung :

BE - Zuführung

Neuer Nutzen

Display errors

Confirm errors

Machine options Single functions

Error

State

Action

Rüstung :

Softwareoptionen

Masch.Fehler anz.

Spurfehler anz.

Component feeding

Nachfüllen

Stellplatz 1

Stellplatz 2

Stellplatz3

Stellplatz4

Location 1

Set location full

Display set-up

Fill magazine carrier

Linear feeder vibrate

Go to WPC fill. posn.

End WPC filling posn.