00191025-01 - 第95页

SIPLACE 80S/F/G User’s Manual 5 Placement Edition 12/96 from S oftware Version SR.009.xx 5.4 Component Handling 5 - 19 5.4.6.3 Fill Magazine Carrier With the function "F ill magazi ne carri er" the fill l evels…

100%1 / 736
5 Placement SIPLACE 80S/F/G User’s Manual
5.4 Component Handling Edition 12/96 from Software Version SR.009.xx
5 - 18
5.4.6 Location Functions
If you have selected the menu item "Locations 1-4" in the "Component feeding" menu, the "Locations 1 - 4"
menu will appear on the screen.
Fig. 5.4.4
5.4.6.1 Set Location Full
In this menu locations 1 - 4 can be set individually to "full”.
Here the fixed table 1 corresponds to location 1 and fixed table 2 to location 3.
5.4.6.2 Display Set-up
If a set-up exists, the set-up can be displayed for each location in this menu.
SI 80 V 9.x
Cluster:
Rüstung :
BE - Zuführung
Neuer Nutzen
Display errors
Confirm errors
Machine options Single functions
Error
State
Action
:
:
:
Rüstung :
Softwareoptionen
Masch.Fehler anz.
Spurfehler anz.
Component feeding
Nachfüllen
Stellplatz 1
Stellplatz 2
Stellplatz3
Stellplatz4
Location 1
Set location full
Display set-up
Fill magazine carrier
Linear feeder vibrate
Go to WPC fill. posn.
End WPC filling posn.
SIPLACE 80S/F/G User’s Manual 5 Placement
Edition 12/96 from Software Version SR.009.xx 5.4 Component Handling
5 - 19
5.4.6.3 Fill Magazine Carrier
With the function "Fill magazine carrier" the fill levels of manually changeable flatpack magazines can be
displayed and altered. Although it is possible to access the menu during placement the fill levels will not be
updated. If a pick-up is taking place at that moment from a track being processed it will not be possible to
show the fill level and an error message will appear.
The individual flatpack magazine carrier is operated in precisely the same way as a flatpack magazine with
a waffle pack changer; see Section 6.8.1.3 "Fill Magazine Carrier", Section 6.8 "Functions: Wafflepack
Changer".
5.4.6.4 Vibrate Linear Feeder
In this menu linear feeders which are included in the set-up can be started individually. In each case just one
linear feeder can be operated.
●
Position the cursor bar over the linear feeder which is to be operated.
●
Confirm your choice with the
Return key
. The linear feeder selected will be indicated by an arrow in the
menu window.
●
You can quit the menu with the
ESC key
. An activated linear feeder will be switched back off.
5.4.6.5 Go to WPC Filling Position (80F only)
With this menu you can go to the refill position of the wafflepack changer during placement and fill magazines
with components.
If components are being picked up from feeders, placement will continue, but if it is necessary to access com-
ponents in the wafflepack changer, the station will wait until refilling is completed (see Section 5.4.6.6).
5.4.6.6 End WPC Filling Position (80F only)
●
Select the "End WPC fill. posn." menu to stop filling the wafflepack changer.
5 Placement SIPLACE 80S/F/G User’s Manual
5.4 Component Handling Edition 12/96 from Software Version SR.009.xx
5 - 20