00198142-01_AI_Stationary-Camera-25-33_TX_de_en - 第4页

Inhaltsverzeichnis 4 Stationary Camera Type 25/33 Stationäre Kamera Typ 25/33 4 Anhang 41 4.1 Auszüge aus der S erviceanleitung 41 4.1.1 Köpfe und Kameras kalibrieren ( SW70x) 41 4.1.2 Einstellungen am Pipettenwechsler 4…

100%1 / 94
Inhaltsverzeichnis
Stationary Camera Type 25/33 Stationäre Kamera Typ 25/33 3
Inhaltsverzeichnis
1 Einleitung 7
1.1 Sicherheitshinweise 7
1.1.1 Konventionen zur Verwendung von Sicherheitshinweisen 7
1.1.2 Sicherheitshinweise zu Arbeiten an starken Magnetfeldern 8
1.1.3 Sicherheitshinweise zur Stromversorgung (mit SMPS) 8
1.1.4 Sicherheitshinweise zur Druckluftversorgung 10
1.1.5 Sicherheitshinweise zu Arbeiten am Schneidgerät 10
1.1.6 Sicherheitshinweise zum Portal 10
1.1.7 Klassifizierung der optischen Systeme 11
1.1.7.1 Klassifizierung der Gesamtmaschine 11
1.1.7.2 Laserklassifizierung 11
1.1.7.3 Klassifizierung der Kamerasysteme 11
1.2 Was vor Beginn der Arbeiten zu tun ist... 12
1.3 Weitere Hinweise 15
1.3.1 Wichtige Hinweise zur umweltfreundlichen Entsorgung von Materialien 15
1.3.2 Hinweis zum Original-SIPLACE-Zubehör 15
1.3.3 EGB-Richtlinien 15
1.3.3.1 Definition von EGB 15
1.3.3.2 Wichtige Schutzmaßnahmen gegen statische Aufladung 15
1.3.3.3 Handhabung von EGB-Baugruppen 16
1.3.3.4 Messen und Ändern an EGB-Baugruppen 16
1.3.3.5 Versenden von EGB-Baugruppen 16
1.3.4 Gültigkeit des Dokuments 16
1.3.5 Übersicht über die Ausgabestände 17
1.4 Personalqualifikation und Schulung 17
2 Kurzbeschreibung 19
2.1 Produktbeschreibung 19
2.2 TX-Serie-Maschinen-Übersicht 20
2.2.1 Seriennummer des Automaten 20
2.3 Voraussetzungen 20
2.4 Einschränkungen 20
2.5 Lieferumfang 21
2.5.1 Stationäre Kamera Typ 25 TH SIPLACE TX [00588101-xx] 21
2.5.1.1 Teile-Übersicht 21
2.5.2 Stationäre Kamera Typ 33 CPP Kopf SIPLACE TX [00588100-xx] 22
2.5.2.1 Teile-Übersicht 22
2.5.3 Abwurfbehälter / Pipettenstation IC-Kamera [03112806-xx] 23
2.6 Benötigte Werkzeuge und Hilfsmittel 23
2.7 Benötigte Arbeitszeit 23
3 Einbau 25
3.1 Vorbereitende Arbeiten 26
3.2 Abwurfbehälter umbauen 27
3.3 Stationäre Kamera Typ SST25 einbauen 31
3.4 Stationäre Kamera Typ SST33 einbauen 35
3.5 Mechanische Arbeiten abschließen 39
3.6 Einstellungen an der Software durchführen 40
Inhaltsverzeichnis
4 Stationary Camera Type 25/33 Stationäre Kamera Typ 25/33
4 Anhang 41
4.1 Auszüge aus der Serviceanleitung 41
4.1.1 Köpfe und Kameras kalibrieren (SW70x) 41
4.1.2 Einstellungen am Pipettenwechsler 42
4.1.2.1 Einstellung der Höhe des Pipettenwechslers 42
4.1.2.2 Einstellung der Höhe der Pipettenstation 43
4.1.2.3 Jumper am Pipettenwechsler 44
4.2 Platinenbeschreibungen 45
4.2.1 Stationäre Kameras 45
4.2.1.1 Vision LED Controller VLC25 GigE DTC [03117587-xx] 45
4.2.1.2 Vision LED Controller VLC33 GigE DTC [03117981-xx] 46
4.3 Stromlaufpläne 48
Table of contents
Stationary Camera Type 25/33 Stationäre Kamera Typ 25/33 5
Table of Contents
1 Introduction 51
1.1 Safety information 51
1.1.1 Conventions for the use of safety instructions 51
1.1.2 Safety Instructions for Working with Strong Magnetic Fields52
1.1.3 Safety Instructions for the Power Supply (With SMPS) 52
1.1.4 Safety Instructions for the Compressed Air Supply 54
1.1.5 Safety Instructions for Work on the Cutting Device 54
1.1.6 Safety Instructions for the Gantry 54
1.1.7 Classification of the Optical Systems 55
1.1.7.1 Classification of the Whole Machine 55
1.1.7.2 Laser Classification 55
1.1.7.3 Classification of the Camera Systems 55
1.2 Preparatory Work... 56
1.3 Other Instructions 58
1.3.1 Environmentally-Friendly Disposal of Materials and Components 58
1.3.2 Use of Original SIPLACE Accessories and Spare Parts 58
1.3.3 ESD Guidelines 59
1.3.3.1 Definition of ESD 59
1.3.3.2 Important Measures to Protect Against Static Charging 59
1.3.3.3 Handling ESD Modules 59
1.3.3.4 Measurements and Modifications to ESD Modules 59
1.3.3.5 Dispatching ESD Modules 60
1.3.4 Validity of Document 60
1.3.5 Release History 60
1.4 Staff Qualifications and Training 60
2 Brief description 61
2.1 Product Description 61
2.2 Overview of TX Series Machines 62
2.2.1 Serial number of the placement machine 62
2.3 Prerequisites 62
2.4 Restrictions 62
2.5 Scope of Delivery 63
2.5.1 Stationary Camera Type 25 TH SIPLACE TX [00588101-xx] 63
2.5.1.1 Overview of Parts 63
2.5.2 Stationary Camera Type 33 CPP Head SIPLACE TX [00588100-xx]64
2.5.2.1 Overview of Parts 64
2.5.3 Reject Box / Nozzle Station IC Camera [03112806-xx] 65
2.6 Tools and Equipment Required 65
2.7 Required Working Time 65
3Installation 67
3.1 Preparatory Steps 68
3.2 Converting the Reject Box 69
3.3 Fitting the Stationary Camera Type SST25 73
3.4 Fitting the Stationary Camera Type SST33 77
3.5 Completing the Mechanical Work 81
3.6 Making the Settings in the Software 82