Error Code List.pdf - 第27页

RL1 31 ERROR CODE LIST 2.4 Errors DA8EEC- 91-210- A0 2.4- 4 54 CPU box over heat DESCRI PTIO N T em p er at ur e i n C PU b o x i s h i gh . CAUSE T em p er at ur e i n C PU b o x i s o v er t h e r ef er en c e v a l u …

RL131

ERROR CODE LIST

2.4 Errors

DA8EEC-91-210-A0

2.4-3

(-) Overrun

DESCRIPTION

Axis (-) overrun sensor is ON.

CAUSE

Trouble of sensor

SOLUTION

Execute return to origin in the [Ret orig] of [Machine adjustment].

Confirm I/O sensor status in the [Input check menu] of [Machine adjustment].

Confirm setting of CPU box board (MCMJEX) and connection of connector.

Please inform us the axis name and the situation.

NOTE

Driver error

DESCRIPTION

A motor driver error was detected

CAUSE

The motor drive detected an error.

SOLUTION

Confirm error code of 7 segment LED of error occurred axis driver.

Power OFF and ON, leave 5 minutes in main menu then restart.

Please inform us the axis name^ error code of 7 segment LED and the situation.

NOTE

Interlock error

DESCRIPTION

Unregistered interlock error occurred.

CAUSE

NC board detected an error of an unregistered axis number.

SOLUTION

Please inform us the axis name and the situation.

If restart is impossible, once power OFF/ON.

NOTE

Axis controller communication error

DESCRIPTION

No response from axis controller.

CAUSE

No response against command to axis controller.

SOLUTION

Please inform us the axis name and the situation.

NOTE

Conveyor width adjust error

DESCRIPTION

Unable to width adjust because PCB exist on the conveyor.

CAUSE

Width cannot be adjusted when there is a PCB on the conveyor because it may drop or get caught.

SOLUTION

Remove PCB.

NOTE

Power box over heat

DESCRIPTION

Temperature in power box is high.

CAUSE

Temperature in power box is over the reference value.

SOLUTION

Check fan moving.

NOTE

RL131

ERROR CODE LIST

2.4 Errors

DA8EEC-91-210-A0

2.4-4

CPU box over heat

DESCRIPTION

Temperature in CPU box is high.

CAUSE

Temperature in CPU box is over the reference value.

SOLUTION

Check fan moving.

NOTE

Safety relay error

DESCRIPTION

Problem occurs in safety relay.

CAUSE

Safety relay may be faulty.

SOLUTION

Power OFF and ON. Please inform us situation.

NOTE

112

Illegal product data

DESCRIPTION

Production data check detects an error in self diagnosis.

CAUSE

Production data has an error.

SOLUTION

Check the error item at [Data check] in [Data modification] and correct data.

NOTE

1203

PCB Recognition Error

DESCRIPTION

A PCB recognition error was detected.

CAUSE

Insertion position may be incorrect.

Part may already have been inserted.

Lighting for recognition may not be lit.

SOLUTION

Modify the insertion position to the correct coordinates.

Check the condition of the insertion position.

Check the condition of the lighting.

NOTE

1236

Momentary power failure error

DESCRIPTION

Low voltage, power failure, Momentary power failure was detected.

CAUSE

The voltage of the R-S phase or the S-T phase is lack of phase more than 24ms.

SOLUTION

Please turn off the main switch and turn on the main switch again. Please confirm the voltage of power supply when

the error occurs repeatedly.

NOTE

RL131

ERROR CODE LIST

2.4 Errors

DA8EEC-91-210-A0

2.4-5

1239

Code Error

DESCRIPTION

Software error was occurred.

CAUSE

Software codes may be abnormal.

SOLUTION

Call the Servicing Department of our company.

NOTE

1250

DriverReadyTimeOut

DESCRIPTION

The axis driver condition does not become Ready.

CAUSE

The axis controller or servo driver may have failed.

SOLUTION

Call the Servicing Department of our company.

NOTE

1300

Emergency stop switch

DESCRIPTION

Emergency stop switch is kept pressed.

CAUSE

Emergency stop signal was detected.

SOLUTION

Please pull and release the emergency stop switch.

NOTE

1301

Servo switch

DESCRIPTION

Servo switch is OFF.

CAUSE

Servo switch OFF signal was detected.

SOLUTION

Turn ON the servo switch.

NOTE

1302

Cover open

DESCRIPTION

Cover is open.

CAUSE

Safety cover is left open.

SOLUTION

Close the cover.

NOTE

1303

Air pressure

DESCRIPTION

Air pressure is down.

CAUSE

Air pressure is lower than the standard value or the air is not supplied.

SOLUTION

Feed the air at the pressure between 0.49MPa - 0.78MPa.

NOTE