Error Code List.pdf - 第71页
RL1 31 ERROR CODE LIST 2.4 Errors DA8EEC- 91-210- A0 2.4- 48
RL131
ERROR CODE LIST
2.4 Errors
DA8EEC-91-210-A0
2.4-47
9806
Auto width parameter error
DESCRIPTION
The pulse control board detected the parameter error.
CAUSE
The parameter against the command that the pulse control board does not have is set.
E.g.: Although the parameter has 0 and 1, 2 was set.
SOLUTION
The operation situation is confirmed. Please contact our service section.
NOTE
9807
Auto width communication error
DESCRIPTION
The communication fault with the pulse control board.
CAUSE
The communication checksum data from pulse control board is not correct.
SOLUTION
The operation situation is confirmed. Please contact our service section.
NOTE
9809
Auto width origin abnormal
DESCRIPTION
Auto width origin return was not normally completed.
CAUSE
Return-to-origin was not complete within the specified period of time.
Breakdown of origin return sensor.
SOLUTION
Please confirm whether auto width axis moves smoothly.
Please confirm whether the origin sensor correctly detects it.
NOTE
9812
Auto width + overrun error
DESCRIPTION
+ Overrun sensor for the auto width axis was activated.
CAUSE
The + overrun sensor was shaded during the movement in a positive direction.
SOLUTION
Check how the overrun sensor is attached and worked.
NOTE
9813
Auto width - over run error
DESCRIPTION
- Overrun sensor for the auto width axis was activated.
CAUSE
The - overrun sensor was shaded during the movement in a negative direction.
SOLUTION
Check how the overrun sensor is attached and worked.
NOTE
RL131
ERROR CODE LIST
2.4 Errors
DA8EEC-91-210-A0
2.4-48
D00AEC-0A-030-A8