192866 Issue 4 - Reel to Reel Manual LoRes - 第14页

TECHNICAL REFERENCE OVERVIEW 1.4 Reel to Reel Manual Chapter Issue 1, Apr 15 4. The inner transport vacuum plate moves the product reel away from the print station, t aking up the slack in the product reel (the backof f …

100%1 / 40
TECHNICAL REFERENCE
OVERVIEW
Chapter Issue 1, Apr 15 Reel to Reel Manual 1.3
The solenoids are mounted inside the machine frame, behind the front panel.
Sequence This section describes the sequence of the Reel to Reel handling mechanism,
assuming that the product is set up and ready to print as detailed in the User
chapter of this manual:
NOTE
1. Vacuum is applied to the tooling when the board clamps are active.
2. Vacuum is applied to the transport vacuum plates when the appropriate
transport clamps are active.
1. The product reel is printed.
2. The rising table moves to transport height.
3. The outer transport clamps release the product reel.
TECHNICAL REFERENCE
OVERVIEW
1.4 Reel to Reel Manual Chapter Issue 1, Apr 15
4. The inner transport vacuum plate moves the product reel away from the print
station, taking up the slack in the product reel (the backoff length).
5. The inner transport clamps release the product reel.
6. The inner transport vacuum plate moves towards the print station.
7. The inner transport clamps, clamp the product reel.
8. The board clamps release the product reel.
9. The inner transport vacuum plate pulls the product reel through the machine
a specified distance to the next product.
10. The board clamps, clamp the product reel.
TECHNICAL REFERENCE
OVERVIEW
Chapter Issue 1, Apr 15 Reel to Reel Manual 1.5
11. The inner transport vacuum plate moves towards the print station creating
the backoff length.
12. The outer transport clamps, clamp the product reel.
13. The rising table moves to vision height.
14. Vision alignment is performed.
15. The rising table moves to print height.
16. The product reel is printed.