00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN - 第515页
Measuring Equipmen t and Tools Location Tester Scope of Delivery 515 Student Guide SIPLACE X-Serie and X4I SW70x (AL2) Location T ester 14.8 Location Tester Z End S topper St ar Gauge for C&P6/ 12 [03019865-01] 14.9 …
Measuring Equipment and Tools
Scope of Delivery Belt Tension Device [00326015-01]
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 514
Belt Tens ion Device [00326 015-01]
14.6 Belt Tension Device [00326015-01]
SIPLACE Compre ssed Air Teste r [00311487-01 ]
14.7 SIPLACE Compressed Air Tester [00311487-01]
Application:
The belt tension measuring device is used to measure
the belt tensions (toothed belt) at the machine.
Application:
The compressed air tester is used to set the air blast at
the C&P6 and C&P12 placement heads in the SIPLACE
placement machines.
Measuring Equipment and Tools
Location Tester Scope of Delivery
515 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Location Tester
14.8 Location Tester
Z End S topper St ar Gauge for C&P6/ 12 [03019865-01]
14.9 Z End Stopper Star Gauge for C&P6/12 [03019865-01]
Application:
The location tester is used to check the feeder
connections at the communication unit of the changeover
table.
Application:
The gauge is used to set the end stop position of the C&P
head Z axis.
Measuring Equipment and Tools
Scope of Delivery Adjustment Aid for C&P DLM [00327005-01]
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 516
Adjustment Aid for C&P DLM [003 27005-01]
14.10 Adjustment Aid for C&P DLM [00327005-01]
Complete set [00327005-01]
1. Gauge for star [00326164-01]
2. Test probe 1.4 mm [00326160-01]
3. Test probe 1.5 mm [00326161-01]
4. Test probe 1.6 mm [00326162-01]
5. Test probe 1.0 mm [00376656-01]
6. Distance gauge [00325445-01]
Measurement tools Application type
Gauge for star Setting the zero point correction for the star
Test probe 1.4 mm Setting the distance between the DP station incremental encoder and the glass
for the sleeve
Test probe 1.5 mm
Test probe 1.6 mm
Test probe 1.0 mm Setting the distance from the Z axis light barrier down to the sleeve shaft
Distance gauge Setting the distance of the valve plunger to the star