00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN - 第183页
Energy and Compressed Air Supply Room for Your Sketches and Notes Cooling the Y Axis Motors for P lacement Area 1/2 183 Student Guide SIPLACE X-Serie and X4I SW70x (AL2) Room for Yo u r Sketches and Notes 5.4 Room for Yo…
Energy and Compressed Air Supply
Cooling the X Axis Motors Pneumatic System
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 182
Cooling the X Axis Motors
5.3.14 Cooling the X Axis Motors
Cooling the Y Axis Motors fo r Placement Are a 1/2
5.3.15 Cooling the Y Axis Motors for Placement Area 1/2
To cool the Y axis motors, an additional pneumatic system is integrated, which sucks the air from the
environment, compresses it in a compressor and conducts its through a hose system to each of the Y
axis motors.
The motor coil temperature is monitored. If this exceeds 110°C, a message will appear on your screen.
This simple cooling system is installed to ensure that the Y axis does not overheat.
Cooling system X axis motor
The exhaust air from the vacuum generator (pressure
control valve) of the C&P head is used to cool the X axis
motors.
Legend
1. Air distributor
2. Air tube for cooling the X axis
3. Hose via the distributor to the pneumatic unit
4. Silencer
Cooling system Y axis motor
Legend:
1. Compressor, located in main unit
2. Startup control for the compressor
3. Y axis motor gantry 4/3
4. Y axis motor gantry 1/2
5. air hose for air supply used for cooling the linear
motor
Energy and Compressed Air Supply
Room for Your Sketches and Notes Cooling the Y Axis Motors for Placement Area 1/2
183 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Room for You r Sketches and Notes
5.4 Room for Your Sketches and Notes
Energy and Compressed Air Supply
Cooling the Y Axis Motors for Placement Area 1/2 Room for Your Sketches and Notes
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 184