00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN - 第19页
Operational Safety Safety Instructions Safety of Operators and Other Persons 19 Student Guide SIPLACE X-Serie and X4I SW70x (AL2) Operationa l Safety 2 Operational Safety See also 13.1.4 Operational Safety [ ➙ 440] Saf…
Operational Safety
Safety Instructions Safety of Operators and Other Persons
19 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Operational Safety
2 Operational Safety
See also
13.1.4 Operational Safety [ ➙ 440]
Safety Instruc tions
2.1 Safety Instructions
The following safety instructions are only an excerpt from the chapter "Operational Safety" in the
SIPLACE user manual.
Safety of Op erators and Ot her Persons
2.1.1 Safety of Operators and Other Persons
Machine operators must only carry out work for which they have been adequately trained and with which
they are totally familiar.
Safety of Plan t and Equipme nt
2.1.2 Safety of Plant and Equipment
▪ Never make changes, however minor, unless you are totally aware of the effect they will have on the
overall functioning of the system.
▪ The stations must always be set up, retooled and maintained by appropriately trained personnel.
▪ Only use SIPLACE original spare parts and authorized accessories. The use of other parts will affect
safety and will invalidate the liability for any consequential damage.
▪ Do not make modifications to the safety equipment. Never bridge protective switches or remove
protective devices.
Warning Labels
2.2 Warning Labels
Warning Labels W201, W203 , W204 and W210 on the Ma chine
2.2.1 Warning Labels W201, W203, W204 and W210 on the Machine
The warning labels are made from soft PVC film, and are abrasion-proof, light-fast and resistant to water
and weathering. Their design meets the requirements of ISO 3864-2 and ANSI Z535.4.
CAUTION
Any staff working on the machine must be familiar with the safety instructions in this user
manual and observe these at all times.
WARNING
The system is electrically driven. When electrical devices are in use, certain parts carry
dangerous voltage levels.
► Switch off at the main switch and disconnect the placement system from the power supply
before carrying out any work on live components.
► Lock the machine.
Operational Safety
Warning Labels W201, W203, W204 and W210 on the Machine Warning Labels
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 20
Warning labels W201, W203, W204 and W210 on the placement system - part 1
▪
W201, article no. 03009338-01 (quantity per machine: 1)
▪
W203, article no. 03009342-01 (quantity per machine: 4)
▪
W204, article no. 03009343-01 (quantity per machine: 8)
▪
W210, article no. 03009350-01 (quantity per machine: 2)