00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN - 第32页
Operational Safety Warning label W209 on the emerge ncy stop buttons Warning Labels Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 32 Warning label W208 "laser cl ass 2" on the PCB conveyor W208, article n o…
Operational Safety
Warning Labels Warning Label W207
31 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Warning Label W207
2.2.7 Warning Label W207
Warning Label W207 on the Axis Unit
2.2.7.1 Warning Label W207 on the Axis Unit
Warning label W207 on the Macrolon ™ panel of the axis unit
W207, article no. [03009346-01]
Warning label W208 "laser class 2" on the PCB convey or
2.2.8 Warning label W208 "laser class 2" on the PCB conveyor
MAIN POWER VOLTAGE!
Switch off the main power switch and wait 30 seconds until the capacitors
have discharged.
NAFTA region: RISK OF ELECTRIC SHOCK OR BURN!
Item No. 03009346-01
LASER RADIATION!
Do not look into beam
Laser class 2
Item no. 03009347-01 (quantity per machine: 4 for the dual conveyor , 2 for
the single conveyor)
Operational Safety
Warning label W209 on the emergency stop buttons Warning Labels
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 32
Warning label W208 "laser class 2" on the PCB conveyor
W208, article no. 03009347-01
Warning label W209 on the emergency stop buttons
2.2.9 Warning label W209 on the emergency stop buttons
For Australia, Canada, Mexico and USA, warning label W209 is
affixed to the extension kit instead of the yellow ring on the
emergency stop buttons.
Item no. 03009349-01 (quantity per machine: 2)
Operational Safety
Warning Labels Warning Label W211 on the CEKON Plug
33 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Warning label W209 on the emergency stop buttons
W209, article no. 03009349-01
Warning Label W211 on the CEKON Plug
2.2.10 Warning Label W211 on the CEKON Plug
RESIDUAL VOLTAGE!
Wait 30 seconds after disconnecting the main power plug from the mains
to allow any residual voltages to dissipate.
NAFTA region: Hazardous Voltage
Residual power at plug prongs and wire ends will cause death or serious
injury. Avoid contact with power plug and/or wire ends for 30 seconds
(quantity per machine: 1)