00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN - 第355页
Component Handling X Feeder General 355 Student Guide SIPLACE X-Serie and X4I SW70x (AL2) X Feeder 10.2 X Feeder General 10.2.1 General X feeder - basic view Performance : Increased deman d for speed at C &P20A head …
Component Handling
Optional Extension on the Changeover Tables Changeover Table
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 354
X Table
10.1.4.1 X Table
Increas ing and Re ducing the COT He ight
10.1.4.2 Increasing and Reducing the COT Height
► Fix the screwed eyelet in the center of the table plate.
► A second person should lift the aluminum plate for X tables.
► Raise the changeover table plate slightly and knock the pins out of the left and right hollow shafts.
► Move the table plate to the correct height.
► Put back the 2 cotter pins (2) into the drilling hole of the sleeve shaft.
► Now, COT height is adjusted.
Optional Extension on the Changeover Tables
10.1.5 Optional Extension on the Changeover Tables
Additional R eel Holder o f the X Table
10.1.5.1 Additional Reel Holder of the X Table
The X table has 40 feeder locations. However, the tape reel container can only accommodate 30 tape
reels. An additional tape reel holder is therefore provided for the X table, as an option.
Additional reel holder X table
X table - adjusting the machine height
Legend
1. Hole for the cotter pins
Component Handling
X Feeder General
355 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
X Feeder
10.2 X Feeder
General
10.2.1 General
X feeder - basic view
Performance :
Increased demand for speed at C&P20A head (Communication, dynamics 40ms for 4mm), Feeder
should not limit placement (communication, transport)
Precision :
Designed for smallest components currently on the market
Reliability:
Reliable drive system, "Closed loop" drive regulation, new mechanical interface, new electrical interface,
brushless DC motors, optimized gear
Flexibility :
Different pitches adjustable, "Hot swapping" possible, upgrade per firmware download possible with
station software, adaptable for "problematic tapes", free step width, variable speed profiles
Usability :
Single track feeder, Tape loading, Interface to operator, Integrated Splice recognition (optional), Able to
handle sticky tapes (optional PSA kit (pressure sensitive adhesive)), no connectors and cables, operator
panel
Intelligence :
Unique feeder- ID, Management data (cycles, power up hours, errors,...), Object data are stored in set-
up control data base
Robustness :
No "on mechanical end stops" --> controlled movement of the transport
Component Handling
X Feeder Parts (Front View) X Feeder
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 356
X Feeder Parts (Front View)
10.2.2 X Feeder Parts (Front View)
X feeder parts (front view)
Legend
X Splice Sensor Note
10.2.2.1 X Splice Sensor Note
1 Locking roll (the locking hook of the
changeover table locks the feeder and
locking roll in the end position.)
7 Opening of the tape channel
2 Power- and Data interface 8 Drive motor for the cover foil unit
3 Centering pin "front" 9 Cover foil rocker
4 Lever to lift the Pickup window to insert and
remove the tape
10 Foil removal unit
5 Pick up window 11 Centering pin "back"
6 Drive motors for tape transport 12 Adjustment of the cover foil tension
NOTICE
X splice sensors are mounted as an option, directly behind the pickup position of the X feeder
and communicate via the feeder CAN Bus --> machine CAN Bus with the station software.