00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN - 第363页

Component Handling X Feeder Oper ation 363 Student Guide SIPLACE X-Serie and X4I SW70x (AL2) Sequence in the 12mm X Feeder M ain Menu 10.2.7.8 Sequence in the 12mm X Feeder Main Menu Sequence main menu 12mm X fee der Set…

100%1 / 522
Component Handling
Operation X Feeder
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 362
– Press for longer to move the tape forwards. Make sure the cover foil is not clamped in.
5. Display showing track on location
6. Transport direction
7. Cycle step
Sequence in the 8mm X Feeder Main Menu
10.2.7.7 Sequence in the 8mm X Feeder Main Menu
Sequence main menu 8mm X feeder
NOTICE
If correctly managed in SIPLACE Pro, the cycle for X feeders can be automatically set when a
recipe is downloaded.
Component Handling
X Feeder Operation
363 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Sequence in the 12mm X Feeder Main Menu
10.2.7.8 Sequence in the 12mm X Feeder Main Menu
Sequence main menu 12mm X feeder
Setting the Pick Up Position for the 8 mm X Feeder
10.2.7.9 Setting the Pick Up Position for the 8 mm X Feeder
► Press the "SET" button.
► It appears the current pick up position on the display (e.g. Pick-Pos 3)
► With the buttons "FORWARD" or "BACKWARD" you can set the new pick up position.
► If you change the pick up position to the previous position, you will see the following message
(example assumes previous position was position 3): Pick-Pos 2 ? on the display.
► Confirm the new pick up position with the yellow button, it appears Pick-Pos 2 ! on the display.
► If pickup position 4 and an 8mm pitch were selected, you will see the menu for manually setting the
"Pickup pos < >" if you press the "SET" button.
► Depend on the Pick up position you can adjust in 2mm steps the correct pick up position.
► Was the pick up position correct appears the menu "Pitch" now and you can set the correct pitch
1,2,4,8mm with the buttons "FORWARD" or "BACKWARD".
► Press the "SET" button two times to confirm your settings.
Component Handling
Operation X Feeder
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 364
Menu Pick Up Position Manual in the Main Menu
10.2.7.10 Menu Pick Up Position Manual in the Main Menu
Setting the pick up position manual