00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN - 第385页
Modular Conveyor Function Description Conveyor Modes 385 Student Guide SIPLACE X-Serie and X4I SW70x (AL2) Conveyor Modes 11.1.14 Conveyor Modes Overview of Flexible Sin gle Conveyor 11.1.14.1 Overview of Flexible Single…
Modular Conveyor
Structure Function Description
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 384
Structur e of Qua d Lane Co nveyor
11.1.13.3 Structure of Quad Lane Conveyor
Legend
The quad lane conveyor has 4 lanes. Conveyor lane 1 is divided into lanes 1L and 1R while conveyor
lane 2 is divided into lanes 2L and 2R.
This conveyor option allows you to produce a complete product with top and bottom sides on the same
conveyor lane. At the same time, another complete product can be produced on the second main lane.
Differences Be tween the X Serie s and X4I Conv eyors With SW70 x
11.1.13.4 Differences Between the X Series and X4I Conveyors With SW70x
▪ Each conveyor side has a fiducial for calibration of the fixed PCB reference corner (from SW70x).
▪ The conveyor and stop position (laser light barrier) in PA1 have been moved 70 mm in the direction
of the input conveyor (max. board length 380 mm).
▪ The length of the bumper under the lifting table plate has been changed from 20 mm to 35 mm. -->
Reduces the transportation times.
▪ Changed setting values for the lifting table times
▪ Changed conveyor zero point and coordinate system with introduction of SW70x
▪ Station software 70x now makes various conveyor modes possible (right, left, outer – fixed conveyor
side).
▪ Conveyor control with switch setting for X4I
(1R) Conveyor lane 1 right (1L) Conveyor lane 1 left
(2R) Conveyor lane 2 right (2L) Conveyor lane 2 left
(T) Transport direction
Modular Conveyor
Function Description Conveyor Modes
385 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Conveyor Modes
11.1.14 Conveyor Modes
Overview of Flexible Sin gle Conveyor
11.1.14.1 Overview of Flexible Single Conveyor
Overview of D ual Conveyor as Single Conv eyor
11.1.14.2 Overview of Dual Conveyor as Single Conveyor
Dual conveyor as single conveyor
Width of single conveyor
Legend
1. Single conveyor "Standard", max. width 1 x 460 mm
2. Single conveyor "excess width", max. width 1 x 508
mm
3. Fixed conveyor side on right
4. Lane 1
5. Board
Modular Conveyor
Conveyor Modes Function Description
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 386
See also
11.3.2 Setting the Fixed Conveyor Edge (from SW701) [ ➙ 391]
Overview of D ual Conveyor with Right or Left Side F ixed
11.1.14.3 Overview of Dual Conveyor with Right or Left Side Fixed
Dual conveyor with right or left side fixed
See also
11.3.2 Setting the Fixed Conveyor Edge (from SW701) [ ➙ 391]
NOTICE
A dual conveyor as single conveyor is possible for conveyor lanes 1 or 2
Conveyor lane 1 is used with the button on the right or outer side.
Conveyor lane 2 is used with the button on the left.
The term Position 'xxx.x' in the diagram refers to the buttons in the station software, for
setting the fixed conveyor side.
NOTICE
During service work, the distance between the fixed side and the shaft fixtures is set to 38.8
with the gauge, in standard mode. The other dimensions are calculated automatically by the
software.
The term Position 'xxx.x' in the diagram refers to the buttons in the station software, for
setting the fixed conveyor side.