00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN - 第387页
Modular Conveyor Function Description Conveyor Modes 387 Student Guide SIPLACE X-Serie and X4I SW70x (AL2) Overview of Dua l Conveyo r I - Plac ement 11.1.14.4 Overview of Dual Conveyor I - Placement Dual conveyor i - pl…
Modular Conveyor
Conveyor Modes Function Description
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 386
See also
11.3.2 Setting the Fixed Conveyor Edge (from SW701) [ ➙ 391]
Overview of D ual Conveyor with Right or Left Side F ixed
11.1.14.3 Overview of Dual Conveyor with Right or Left Side Fixed
Dual conveyor with right or left side fixed
See also
11.3.2 Setting the Fixed Conveyor Edge (from SW701) [ ➙ 391]
NOTICE
A dual conveyor as single conveyor is possible for conveyor lanes 1 or 2
Conveyor lane 1 is used with the button on the right or outer side.
Conveyor lane 2 is used with the button on the left.
The term Position 'xxx.x' in the diagram refers to the buttons in the station software, for
setting the fixed conveyor side.
NOTICE
During service work, the distance between the fixed side and the shaft fixtures is set to 38.8
with the gauge, in standard mode. The other dimensions are calculated automatically by the
software.
The term Position 'xxx.x' in the diagram refers to the buttons in the station software, for
setting the fixed conveyor side.
Modular Conveyor
Function Description Conveyor Modes
387 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Overview of Dua l Conveyo r I-Placement
11.1.14.4 Overview of Dual Conveyor I-Placement
Dual conveyor i
-
placement
See also
11.3.2 Setting the Fixed Conveyor Edge (from SW701) [ ➙ 391]
NOTICE
During service work, the distance between the fixed side and the shaft fixtures is set to 38.8
with the gauge, in standard mode. The other dimensions are calculated automatically by the
software.
The term Position 'xxx.x' in the diagram refers to the buttons in the station software, for
setting the fixed conveyor side.
Modular Conveyor
Technical Data - Single Conveyor Technical Data
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 388
Overview of Quad Lane Conveyor
11.1.14.5 Overview of Quad Lane Conveyor
See also
11.3.2 Setting the Fixed Conveyor Edge (from SW701) [ ➙ 391]
Technical Data
11.2 Technical Data
Technical Da ta - Single Co nveyor
11.2.1 Technical Data - Single Conveyor
(1L) Lane 1 left (2L) Lane 2 left
(1R) Lane 1 right (2R) Lane 2 right
(3) Machine coordinate system
Fixed conveyor side Right (standard), left (optional)
Max. component height 6 mm for the C&P12
8.5 mm for the C&P6
4 mm for the C&P20A
25 mm for the Twin Head
PCB format (LxW) 50 mm x 50 mm to 450 mm x 508 mm
2" x 2" to 18" x 20"
long board to 610 mm (24"), (option)
PCB thickness 0.3 mm to 4.5 mm
Max. PCB warpage upwards: 6 mm - board thickness
Downwards: 0.3 mm + PCB thickness
Clearance on PCB underside max. 40 mm
PCB transport height 830 mm ±15 mm (standard)
900 mm ±15 mm (option)
930 mm±15 mm (option)
950 mm ±15 mm (option SMEMA)