00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN - 第426页

Head Modularity Twin Head Compressed Air Distributor for the Placement Heads Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 426 Twin Hea d 12.7.3 Twin Head Compress ed Air Distribut or for the Placement Heads 12.8 Com…

Head Modularity

Preperation Head Plate C&P20A

425 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)

C&P20A

12.7.2 C&P20A

CAUTION

Before a CPP head is fitted, always check the length of the centering pins. These centering pins

may only extend out of the head plate by a maximum of 4.0 mm (tolerance: -0.2 mm). If these

are longer, the incremental disc for the star could be irreparably damaged.

Head Modularity

Twin Head Compressed Air Distributor for the Placement Heads

Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 426

Twin Head

12.7.3 Twin Head

Compress ed Air Distribut or for the Placement Heads

12.8 Compressed Air Distributor for the Placement Heads

There are two different pneumatic distributors which are fixed under the head interface.

The distributor used depends on the trailing cable version in use. This means that the old pneumatic

distributor is used for the old trailing cable on the gantries CFK 02 and 04 and the compressed air

distributor version 02 is used for gantry CFK 06 with the vacuum pump option.

The compressed air for the pressure control valve and the return cylinder is made available via a supply

line from the compressed air distributor for those placement heads which are prepared for Fast Head

Exchange.

Head Modularity

Compressed Air Distributor for the Placement Heads Twin Head

427 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)

Pneumatic distributor for trailing cable CFK02/04