00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN - 第436页
Head Modularity Axis Unit A364 Room for Your Sketches and Notes Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 436
Head Modularity
Room for Your Sketches and Notes Axis Unit A364
435 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Room for You r Sketches and Notes
12.11 Room for Your Sketches and Notes
Head Modularity
Axis Unit A364 Room for Your Sketches and Notes
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 436
MTC2
Overview Functional principles
437 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
MTC2
13 MTC2
Overview
13.1 Overview
Functional principles
13.1.1 Functional principles
The MTC2 has two towers which work independently of one other. They each have a lifting axis and a
feed axis. The lifting axes can be set up with a large number of waffle pack trays in cassettes and
transport these vertically. The feed axes transport waffle pack trays which have been set up horizontally
to the pick-up position of the SIPLACE station.
The waffle pack trays (WPT) to be set up are placed in waffle pack tray carriers (WTC). They are then
inserted in a cassette one above the other with a small gap between each of them, and fixed in place
with the WTC interlock. The cassettes are fixed in place in the tower with the cassette interlock.
The lifting axes are moved vertically on linear carriages which are driven by a servo motor with a spindle.
The gradient of 20 degrees from the vertical axis reduces the travel range of the WTCs to the pickup
position of the SIPLACE station.
Complete view of SIPLACE machine with MTC2 in
location 2
The MTC2 shows a unit which, as a whole, can be used
as a moveable changeover table.
The MTC2 was developed for the machine generation
SIPLACE HF/HF3 and can also be installed in the
machine generation SIPLACE X.
The MTC2 can be installed in locations 2/4 of SIPLACE
X2, X3 and X4 machines.
MTC2 function
Legend
1. Lifting axis
2. Cassette with WTCs
3. Feed axis
4. WTC on the feed axis