00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN - 第441页
MTC2 Overview Operational Safety 441 Student Guide SIPLACE X-Serie and X4I SW70x (AL2) Warning Labels Warning Labels Information label below the main switch Location of the warning labe ls on the MTC2 (left-hand side) Le…
MTC2
Operational Safety Overview
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 440
Operational Safety
13.1.4 Operational Safety
Safety Instruc tions
13.1.4.1 Safety Instructions
Warning and Information L abels on the MTC2
Warning and Information Labels on the MTC2
CAUTION
The following pages contain only the most important safety information.
► Please observe the safety instructions detailed in the current operating instructions.
Location of the warning labels on the MTC2 (right-hand
side)
Legend
1. Information label below the main switch
2. Warning labels on the enclosures around the electric
parts
3. Warning label by the lifting axis motors
4. Warning labels by the toothed belts of the lifting axis
and feed axis
5. Warning labels in the feeding area and the lifting
frame area
6. Warning labels in the refill area (behind the protective
doors)
7. Information label at the ground terminal
8. Warning labels on the motor controller covers (below
the enclosure)
9. No loads warning by the feed axis
10. Information labels above the guides for the fork lift
truck
11. Information label for the cranking device
MTC2
Overview Operational Safety
441 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Warning Labels
Warning Labels
Information label below the main switch
Location of the warning labels on the MTC2 (left-hand
side)
Legend
1. Information label below the main switch
2. Warning labels on the enclosures around the electric
parts
3. Warning label by the lifting axis motors
4. Warning labels by the toothed belts of the lifting axis
and feed axis
5. Warning labels in the feeding area and the lifting
frame area
6. Warning labels in the refill area (behind the protective
doors)
7. Information label at the ground terminal
8. Warning labels on the motor controller covers (below
the enclosure)
9. No loads warning by the feed axis
10. Information labels above the guides for the fork lift
truck
11. Information label for the cranking device
MTC2
Operational Safety Overview
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 442
Warning labels on the enclosures around the electric parts
Warning label by the lifting axis motors
Warning labels by the toothed belts of the lifting axis and feed axis
Warning labels in the feeding area and the lifting frame area
Warning labels in the refill area (behind the protective doors)