00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN - 第512页

Measuring Equipment and Tools Scope of Delivery Axis Tester (Old Version) and Adapter Board Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 512 Item numbers ▪ Axis tester, inc. ada pter board [00303430 -06] ▪ Axis test…

100%1 / 522
Measuring Equipment and Tools
SIPLACE Diagnosis Adapter A364 [03051220-01] Scope of Delivery
511 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Scope of Delivery
14.1.1 Scope of Delivery
The SIPLACE axis tester package [03002801-01] contains the following components:
▪ SIPLACE axis tester [03000761-01]
▪ Test cable A361 ... A363 (length 150 cm) with 37 pin connector and 37 pin socket for connection of
axis control units from S2x, F4/F5 and HS machines [03002803-01]
▪ CAN Bus cable [00349679-03]
▪ RS232-C cable [03002804-01]
▪ Manual for axis tester [00193370-01]
SIPLACE Diagnos is Adapter A364 [03051220-0 1]
14.2 SIPLACE Diagnosis Adapter A364 [03051220-01]
Application:
The adapter card is used to check the A364 axis card dynamics.
The A364 axis card is equipped with two processors (module 1 and module 2) i.e. one processor controls
two axes.
Axis Tes ter (Old V ersion) and Adapt er Board
14.3 Axis Tester (Old Version) and Adapter Board
NOTICE
This adapter is designed for all machines with A364 and as an adapter for the CAN test box
with force measuring tool.
Adapter card for A364
Legend
Module 1: Axis 1/2
Module 2: Axis 3/4
1. Bootstrap mode: m1 = module1 / m2 = module2
2. Diagnosis – connector X6
3. Connection X3 SIPLACE AxisTester
4. Connection X2 Axis test box
5. Connection X1 to A364
6. Switches:
7. Diagnosis – 7 segment display
8. CAN bus connector (Sub-D)
9. BNC sockets:
10. Reset both processors
NOTICE
This axis tester is designed for all machines with A363. This function is limited for machines
with A364.
Measuring Equipment and Tools
Scope of Delivery Axis Tester (Old Version) and Adapter Board
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 512
Item numbers
▪ Axis tester, inc. adapter board [00303430-06]
▪ Axis tester [00328041-05]
▪ Cable [00304771-03]
▪ Adapter board for axis tester [00328040-01]
Application:
Comparison of axis dynamics for placement head and gantry axes.
Adapter board for axis tester
Art.No. [00328040-01]
SIPLACE axis tester – front
Art.No. [00328041-05]
SIPLACE axis tester – back
Art.No. [00328041-05]
Measuring Equipment and Tools
Track Signal Tester [00343785-01] Scope of Delivery
513 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Track Signal Tester [00343785-01]
14.4 Track Signal Tester [00343785-01]
Track Signal Tester [00322510-01]
14.5 Track Signal Tester [00322510-01]
Application:
The track signal tester is used to test the track signals of
the incremental measurement system for the gantry axes
(from SIPLACE HS50).
Application:
The track signal tester is used to test the track signals of
the incremental measurement system - particularly for
the head axes. It is also used for the track signals of the
gantry axes on older SIPLACE machines (S20, F4).