00194614-08 Trainingsdoku. SG X-Serie_X4i SW70x (AL2)_EN - 第56页
Overview Axis Unit with A364 Over view of Components Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 56 Axis Unit A364 3.2.5.1 Axis Unit A364 See also 12.9.1 Axis Unit A364 [ ➙ 429] Configuration of axis unit X4I wit…
Overview
Overview of Components Axis Unit with A364
55 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Axis Unit with A364
3.2.5 Axis Unit with A364
The axis unit contains the servo boards, axis controller boards, power supplies (+/-15V,+5V) and ballast
circuit. The flexible axis unit is equipped with the correct servo and axis boards for the machine type and
head configuration concerned. Depending on the machine type, there will be either one or two axis units
in the machine.
See also
12.9 Slots in the Axis Unit [ ➙ 428]
Computer unit with BoxPC [00351894-xx]
Position of assemblies in the computer unit
1. 4 port USB hub 2.0
2. Ethernet switch (only for optional 3D sensor)
3. Video multiplexer
4. Computer 1:
Vision computer (from SW 70x)
5. Computer 2:
Station computer (from SW 70x)
6. Computer 3:
Additional BoxPC – only for 3d sensor option
NOTICE! An external DVD drive is supplied with
the delivery package.
NOTICE! In future, X series machines will be
supplied with higher performance BoxPCs. This means
that machine control and the Vision function are handled
by only one BoxPC.
Overview
Axis Unit with A364 Overview of Components
Student Guide SIPLACE X-Serie and X4I SW70x (AL2) 56
Axis Unit A364
3.2.5.1 Axis Unit A364
See also
12.9.1 Axis Unit A364 [ ➙ 429]
Configuration of axis unit X4I with C&P20A heads
Legend
1. Power supply +/- 15, +5 V
2. Ballast circuit, only in axis unit PA2
3. Power supply +/- 15V
4. Fan unit (blows downwards)
5. Axis card A364 for gantry 1/2
6. Axis card A364 for gantry 4/3
7. Servo amplifier X axes
8. Servo amplifier Y axes
9. Brake board for each X axis and Y axis
10. Servo star axis (2x)
11. Servo Z axis (2x)
12. DC/DC converter DP drives (2x)
13. Placement area 1 gantry 1 (top half)
14. Placement area 1 gantry 4 (bottom half)
Overview
Overview of Components Changeover Table Components
57 Student Guide SIPLACE X-Serie and X4I SW70x (AL2)
Axis Con troller Board A364
3.2.5.2 Axis Controller Board A364
Changeover Table Components
3.2.6 Changeover Table Components
SIPLACE X machines with SW70x only support the new generation of X feeders and X component
changeover tables. This changeover table does not have any electronic assemblies, such as the
communication unit for feeder supply and control in the previous tables. The power supply for the feeders
is without contact, via an inductive interface on the docking unit, directly to the feeders. Control and