IPS adjustment on the modules.pdf - 第130页

Edition 1 .0 IPS Adjustment for V arious Head T ypes on the Module <H08MQ head > FK - 9F50 - 74 -0 E 6- 16 FUJI CORPORA TION 4. Check that “ ED GE2 _N G , E DGE 3_OK ” di spl a ys . A l so c he ck t ha t S2 = 100 %…

100%1 / 172
Edition 1.0
IPS Adjustment for Various Head Types on the Module
<H08MQ head>
FK-9F50-74-0E
6-15
FUJI CORPORATION
Checking the fiel d of vis ion
External l ight can affect the results, so be sure t o perform the pr ocedure in a shaded area.
1. Continuing from the previous procedure, press the upper button to display “Adjustment
3”.
2. Press the low er but t on t o display “ ADJUSTMENT 3 CHECK”.
3. Block one of the IPS camera lenses with a piece of paper, and then press the lower
button. (In the example below, the right-hand lens (as viewed from the front of the
machine) is blocked).
CONFIDENTIAL
Edition 1.0
IPS Adjustment for Various Head Types on the Module
<H08MQ head>
FK-9F50-74-0E
6-16
FUJI CORPORATION
4. Check that “EDGE2_NG, EDGE3_OK” displa ys . A lso check t hat S2 = 100 %, S3 = 0 %
displays.
5. Block the other lens with a piece of paper, and then press the lower button. (In the
example below, the left-hand lens (as viewed from the front of the machine) is block ed).
6. Check that “EDGE2_OK, EDGE3_ NG” displays. Als o check that S2 = 0 %, S3 = 100 %
displays.
7. Press the upper and lower buttons together to reverse the LCD contrast, and then
check that there are no white areas within the green rectangles. If there are white
areas within the green rectangles, it is necessary to readjust the position of the camera.
If the camera position is readjusted, it is necessary to check the resolution, center
values and t ilt.
CONFIDENTIAL
Edition 1.0
IPS Adjustment for Various Head Types on the Module
<H08MQ head>
FK-9F50-74-0E
6-17
FUJI CORPORATION
8. Press the upper button t o disp lay “ADJUSTMENT 3, BACK”.
9. Press the low er but t on t o display “ A DJUSTMEN T 2 CURRENT”.
10. Press the upper button to display “ ADJUSTMENT 2 SET”.
11. Press the upper button to display “ ADJUSTMENT 2 ADJUSTMENT 3” .
12. Press the upper button to display “ ADJUSTMENT 2 BACK”.
13. Press the lower button t o display “ADJUSTMENT 1 SET”.
14. Press the upper button to display “ADJUSTMENT 1 ADJUSTMENT 2”.
15. Press the upper button to display “ ADJUSTMENT 1 BACK”.
16. Press the lower button t o display “ADJ MODE”.
17. The field of vision check is now complete.
If the ADJUSTMENT 1 data was updated, it is necessary to perform the
calibration using [Accessory software] – [Calibration] – [Remeasure
Calibration] command
.
Otherwise, the saved values will not be updated.
CONFIDENTIAL