IPS adjustment on the modules.pdf - 第30页

E dition 1 .0 IPS Adjustment for V arious H ead T ypes on the Module < H24 head > FK - 9F50 - 74 - 0E 1- 18 FUJI CORPORA TION Checki ng t he Nozz le Exist e nc e Fi eld of V isio n 1. Press the upper butt on to cha…

100%1 / 172
Edition 1.0 IPS Adjustment for Various Head Types on the Module
<H24 head>
FK-9F50-74-0E 1-17
FUJI CORPORATION
5. Press the upper button t o disp lay “CURR ENT BACK”.
6. Press the low er but t on t o return to “ADJUST M ENT 2 CURRENT”.
7. Press the upper button to display “ADJUSTMENT 2 SET” and then press the lower
button to save the sett ings.
CONFIDENTIAL
Edition 1.0 IPS Adjustment for Various Head Types on the Module
<H24 head>
FK-9F50-74-0E 1-18
FUJI CORPORATION
Checki ng t he Nozzle Exist e nc e Fi eld of Vision
1. Press the upper button to change to “ADJUSTMENT 3” and then press the lower
button to enter the adjustment mode. Press the lower button to display
“ADJUSTMENT 3 CHECK” then check the value is in the t olerance below.
2. Block the nozzle existence area glass with a piece of paper and then press the lower
button to display “ADJUSTMENT 3 CHECK”. (In the example below the right-hand
glass as v iew ed from the f r ont of the machine is blocked).
AREA 4 = OK
S4 = 0%
AREA4 = NG
S4 = 100%
CONFIDENTIAL
Edition 1.0 IPS Adjustment for Various Head Types on the Module
<H24 head>
FK-9F50-74-0E 1-19
FUJI CORPORATION
Below is the procedure of returning to the [ADJ M ODE] window.
1. Press the upper button t o disp lay “ADJ US TMENT 3 BACK”.
2. Press the low er but t on t o display “ A DJUSTMEN T 2 CURRENT”.
3. Press the upper button t o disp lay “ADJ US TMENT 2 SET”.
4. Press the upper button t o disp lay “A DJUS TMENT 2, ADJU ST ME NT 3”.
5. Press the upper button t o disp lay “ADJUSTMENT 2, BACK”.
6. Press the low er but t on t o display “ A DJUSTMEN T 1 SET”.
7. Press the upper button t o disp lay “ADJ US TMENT 1 ADJUSTMENT 2”.
8. Press the upper button t o disp lay “ADJ US TMENT 1 BACK”.
9. Press the low er but t on t o display “ A DJ M O D E” .
10. Turn the ma c hine OFF.
11. Remov e t he I PS mon it or j ig.
If the ADJUSTMENT 1 data was updated, it is necessary to perform the
calibration using [Accessory software] – [Calibration] – [Remeasure
Calibration] comm and. O t herw ise, the saved val ues w i l l not be u pdated.
CONFIDENTIAL