IPS adjustment on the modules.pdf - 第49页

E dition 1 .0 IPS Adjustment for V arious H ead T ypes on the Module <H24G/H24 S/H24A > FK - 9F50 - 74 -0E 2- 15 FUJI CORPORA TION Checki ng t he Nozz le E xistence Field of V isio n 1. Press the upper butt on to c…

100%1 / 172
Edition 1.0 IPS Adjustment for Various Head Types on the Module
<H24G/H24S/H24A>
FK-9F50-74-0E 2-14 FUJI CORPORATION
6. Press the low er but t on t o return to “ADJUST M ENT 2 CURREN T” .
7. Press the upper button to display “ADJUSTMENT 2 SET” and then press the lower
button to save the sett ings.
CONFIDENTIAL
Edition 1.0 IPS Adjustment for Various Head Types on the Module
<H24G/H24S/H24A>
FK-9F50-74-0E 2-15 FUJI CORPORATION
Checki ng t he Nozzle Existence Field of Vision
1. Press the upper button to change to “ADJUSTMENT 3” and then press the lower
button to enter the adjustment mode. Press the lower button to display
“ADJUS TM E NT 3 C HE CK” then check the val ue is in the toleran c e below.
2. Block the nozzle existence area glass with a piece of paper and then press the lower
button to display “ADJUSTMENT 3 CHECK”. (In the example below the right-hand
glass as view ed from the fr ont of t he machine is b lo cked).
AREA4
＝
OK
S4
＝
0%
AREA4
＝
NG
S4
＝
100%
Nozzle existence field
CONFIDENTIAL
Edition 1.0 IPS Adjustment for Various Head Types on the Module
<H24G/H24S/H24A>
FK-9F50-74-0E 2-16 FUJI CORPORATION
How to retur n t o [ AD J M O DE] window.
1. Press the upper button t o disp lay “ADJ US TMENT 3 BACK” .
2. Press the low er but t on t o display “ A DJUSTMEN T 2 CURRENT”.
3. Press the upper button t o disp lay “ADJ US TMENT 2 SET”.
4. Press the upper button t o dis play “A DJUST MEN T 2, ADJUSTMENT 3”.
5. Press the upper button t o disp lay “ADJ US TMENT 2, BACK”.
6. Press the low er but t on t o display “ A DJUSTMEN T 1 SET”.
7. Press the upper button t o disp lay “ADJ US TMENT 1 ADJUSTM ENT 2” .
8. Press the upper button t o disp lay “ADJ US TMENT 1 BACK”.
9. Press the low er but t on t o display “ A DJ M O D E” .
10. Turn the h ead bench O FF.
11. Remov e t he I PS mon it or j ig.
12. Attach the head cov er.
If the ADJUSTMENT 1 data was updated, it is necessary to perform the
calibration using [Accessory software] – [Calibration] – [Remeasure
Calibration] comm and. O t herw ise, the saved val ues w i l l not be u pdated.
CONFIDENTIAL