DS-Spectrum-ll-S2-900-NordsonASYMTEK
The Spectrum ® II series is ideal f or high-v olume c onsumer electronics and MEMs app lications with c ap abilities that dec rease process v ariation, inc rease yield, and reduc e c ost. Supported app lications include …
The Spectrum
®
II series is ideal for high-volume consumer
electronics and MEMs applications with capabilities that
decrease process variation, increase yield, and reduce cost.
Supported applications include underll, cavity ll, die attach,
and encapsulation.
Software-managed temperature, uid, and air pressure provide
closed-loop control that eliminates manual adjustments.
Calibrated Process Jetting (CPJ) automatically maintains
volumetric repeatability during long production runs. And the
standard digital vision system includes high-brightness LEDs
with RGB three-color control for good image contrast and
detection for better pattern recognition. The Monocle Vision
Package (MVP) enhances contrast and eld of view size and
resolution for more challenging applications.
With over 30 years of precision uid dispensing experience and
a reputation for the best closed-loop process controls, Nordson
provides customers with a reliable uid dispensing partner. Our
experienced worldwide engineering, applications development,
and technical service network supports you from process
development to full-scale production.
Features and Benets
Scalable design for maximum exibility with single or
dual lanes.
A compact footprint maximizes oor space.
High-precision X-Y-Z motion system.
Total system wet dispense accuracy for dots and lines.
Patented, closed-loop process controls for consistent
dispense weights over long production runs.
Integrated vision system with on or o-axis lighting.
Non-contact laser or tactile height sensor.
Digital vision system with high-brightness RGB
lighting.
Manual or programmable uid and valve pressures.
Optional independent X-Y-Z dual-simultaneous valve
dispensing for increased productivity.
Optional integrated substrate heating for up to 6
stations.
Optional programmable dual-axis tilt.
ASYMTEK Spectrum ll S2-900 Series
Scalable Solutions for High-Volume Manufacturing and Assembly
ASYMTEK Spectrum ll S2-900 Series
Specications
Motion System
Z repeatability
(1)
±15 µm (0.0006 in.), 3 sigma
X-Y repeatability
(1)
±15 µm (0.0006 in.), 3 sigma
X-Y acceleration 1 g peak
X-Y velocity 1 m/s peak (40 in./s)
X-Y-Z encoder resolution 1 µm
Single Applicator —
Wet Dispensing Accuracy &
Repeatability
Cp ≥ 1.0 ±35 µm (0.0016 in.)
Cpk ≥ 1.0
(1)
±40 µm (0.0016 in.)
Z-gap Performance
Z-Gap Repeatability
(2)
±15 µm (0.0006 in.), 3 sigma
Minimum Z-Gap Capability 50 µm (0.002 in.)
Dispense Area (X-Y)
339 x 410 mm (13.3 x 16.1 in.)
Conveyor
Min. board/carrier width
(3)
34 mm (1.3 in.)
Max. board/carrier thickness 12 mm (0.5 in.)
Max. board/carrier length One station: 340 mm (13.4 in.)
Three stations: 320 mm (12.6 in.)
Min. board/carrier length 25 mm (1.0 in.)
Max. board/carrier width Single lane: 535 mm (21.1 in.)
Dual lane: up to 228 mm (9.0 in.)
(conguration dependent)
Conveyor overboard clearance 30 mm (1.2 in.) standard
Computer
Laptop
Soware
Fluidmove® uid dispensing software
Facilities Requirements
System footprint Single heat station: 600 mm wide x 1321 mm deep (23.6 x52.0 in.)
Two heat stations: 850 x 1321 mm (33.5 x52.0 in.)
Three heat stations: 1100 x 1321 mm (43.3 x52.0 in.)
Air supply Two air supplies: one with 3 CFM @ 100 psi for contact tooling, a second one with 1 CFM @ 100 psi for
the rest of the system (100 psi = 689 kPa, 6.8 atm)
Power (mains) Power supply accommodates 200-240 VAC,
47-63 Hz single phase, 30 A
Note: System can run on 10A, 120 VAC without heater option installed.
Ventilation Downdraft or updraft.
System weight
(4)
377-422 kg (830-930 lbs.)
Standards Compliance
Semi S2-0818
Semi S8-0218
EN 60204-1: 2018 (CE)
SMEMA
Optional Features
• Controlled process substrate heat
• Dual-action dispensing (two applicators operate independently)
• Exterior bulk uid reservoir: 600 cc (20 oz), includes remote feed and uid level sensor
• Hot plate, process development (batch processing) low uid sensor, magnetic or capacitive
• Monocle
Vision Package (MVP) for increased contrast, eld of view, and vision resolution
• SECS/GEM interface
• Ventilation interlocking for volatile organic compound (VOC) dispensing, e.g., ux or primer
• Patented Calibrated Process Jetting (CPJ) and Mass Flow Calibration (MFC) weight scale option
• Fids-on-the-Fly software for high-speed ducial capture
• Tilt jetting or Automatic Dual Simultaneous (ADS) dispensing options
• Pre and post-dispense heat stations
(1) Wet dispense Cpk is tested against ASYMTEK standard sealant line path accuracy test method.
(2) Z-gap repeatability is tested with ASYMTEK standard white ceramic, performance with other substrates may vary.
(3) Contact factory regarding smaller boards or carriers.
(4) System weight varies depending on conguration.
ASYMTEK Spectrum ll S2-900 Series
System Packages
Essential
Single-lane processing. A exible precision dispensing solution for high-mix manufacturing equipped with
heating and single-lane processing.
High Yield
High precision and
accuracy.
The addition of a high-resolution Monocle Vision camera and piezo-driven
IntelliJet
®
Jetting System makes this platform an excellent choice for maximum
control and accuracy.
Productivity
Dual-lane processing. This system adds a second conveyor, a dual-lane, to increase throughput by 60% over
a single-lane system. With a dual-lane system, dispensing occurs in one lane while
queued parts reach a set temperature in a second lane.
Productivity Plus
Dual-lane and pre and post-
heat processing.
The system includes a dual-lane conveyor and pre and post-queue stations that heat
substrates before and after processing to reduce conveyance time and maximize
throughput.
Nordson Electronics Solutions builds the future of electronics reliability all across the globe. We’re proud of the decades of
service and solutions we’ve provided to enhance electronics reliability. No matter where you are, you’ve likely manufactured
or purchased a product made reliable with our equipment. The Spectrum ll is an ideal uid dispensing platform for consumer
electronics and MEMs applications.
Explore the Spectrum ll system packages. Continue to see how we support the future.
For more information, contact us at info-electronics@nordson.com.
Soware Enabled
SECS/GEM
CAD Import Software, Windows®
Conveyance and Tooling
Standard tooling
Flexible impingement tooling
Custom tooling (requires pre-approval)
Lookup sensor
Tooling vacuum sensor
Cleaning station
Fluid Delivery
Magnetic low uid sensor
Capacitive low uid sensor
Needle heater
Power Kits
European power cord
Japan power kit
Recommended Options