TX系列贴片机机台半年保养手册 - 第20页
www.asm-smt.com
3 WF 3 TX-Series Maintenance Empty and clean the reject bin 2 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T2
Wear Part: Consumables:
C3
www.asm-smt.com
1 Remove the reject bin. 2 Empty the reject bin into a waste box. 3 Clean the reject bin.
4 Return the reject bin. 5 Repeat steps 1 to 4 for the other locations.
www.asm-smt.com
4 WF 3 TX-Series Maintenance Remove the CPPx to be maintained 12 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T7, T8, T9, T14, T58
Wear Part: Consumables:
www.asm-smt.com
1 Move the gantry with the head to be main-
tained to the end limit.
2 Put on the component sensor protection. 3 Move the gantry with the head to be main-
tained to a good working position.
4 Unplug the compressed air connections
from the head.
5 Open the two clips (1) and unplug the rib-
bon cables(2).
6 Open the camera cable clip.