TX系列贴片机机台半年保养手册 - 第32页
www.asm-smt.com
9 WF 3 TX-Series Maintenance Maintain the conveyor 4 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C3, C4, C31
www.asm-smt.com
1 Preserve the linear guidances. 2 Clean the guide shafts. 3 Clean all recirculating ball screws.
www.asm-smt.com
10 WF 3 TX-Series Maintenance Clean / replace the head exhaust filter 5 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T31
Wear Part:
W21
Consumables:
C19
www.asm-smt.com
1 Loosen the screw. 2 Take out the filter. 3 Blast out the dirt.
4 Check if the filter is clean. 5 If OK go to step 7. 6 If NOT OK replace it with a new one.