TX系列贴片机机台半年保养手册 - 第46页
www.asm-smt.com
14 WF 3 TX-Series Maintenance Clean the feeder modules and cut the tapes 3 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T1, T18
Wear Part: Consumables:
www.asm-smt.com
1 Vacuum all loose components from the
feeder modules.
2 Cut the remaining tapes at the feeder. 3 Ensure to leave 2 holes overlap when cut-
ting.
4 Repeat steps 1-3 at all feeder tables.
www.asm-smt.com
15 WF 3 TX-Series Maintenance Switch on the machine and return the tables (COT) 6 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
www.asm-smt.com
1 Switch on the machine. 2 Return the COT at location 2. 3 Close the cover at location 2.
4 Press the insert COT button to dock the
table.
5 Repeat steps 2 to 4 for the other location. 6 Do not press the start button.