TX系列贴片机机台半年保养手册 - 第60页
20 WF 3 TX-Series Maintenance Endurance run 5 min 2 / 2 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e n a n c e Machine Status ON …
20 WF 3 TX-Series Maintenance Endurance run 5 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
www.asm-smt.com
1 Click on "Endurance run after mainten-
ance".
2 Check if the result is OK (green hook). If
the result is OK(1) click on "Display pro-
duction status"(2).
3 If the result is NOT OK (red cross(1)) click
on "Generate report"(2) and contact ser-
vice.
4 Enter required information and click on
"Save".
5 Click on "Settings and options". 6 Click on "User settings".
20 WF 3 TX-Series Maintenance Endurance run 5 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
www.asm-smt.com
7 Click on "Basic production" and "Display
production status".
8 Click on "Block conveyor". 9 Unblock both lanes and click on "OK".