YSM20_YSM20W_Mainte_E.pdf - 第26页
2.4 PU-axis 5-8 2.4.1 Dual-stage type 5-8 2.4.2 Dual-lane type 5-9 2.4.3 Single-lane type 5-10 2.5 Head unit 5-11 2.5.1 HM head unit 5-11 2.5.2 FM head unit 5-12 Chapter 6 How to replace consumable par ts 1. Nozzle 6-1 1…
5. 1-year maintenance 3-40
5.1 Cleaning spline shaft 3-40
5.1.1 HM head 3-40
5.1.2 FM head 3-42
5.2 Conveyor 3-44
5.2.1 Inspecting conveyor belt and cleaning the guides 3-44
5.3 Cleaning and lubricating W-axis 3-52
5.3.1 YSM20 Dual-stage: Cleaning and lubricating W/U axes 3-52
5.3.2 YSM20/20W Dual-lane: Cleaning and lubricating W-axis 3-57
5.3.3 YSM20/20W Single-lane: Cleaning and lubricating W-axis 3-60
5.4 Cleaning shaft tip 3-63
5.4.1 HM head: Cleaning shaft tip 3-63
5.4.2 FM head: Cleaning shaft tip 3-65
5.5 Air/mist filter 3-67
5.5.1 Replacing air/mist filter and cleaning cup 3-67
5.6 FM head: Cleaning inside of side-view camera 3-69
6. 2-year maintenance 3-74
6.1 Replacing the ejector bit 3-74
Chapter 4 Maintenance of options
1. Ionizer 4-1
1.1 Cleaning ionizer discharge needle (Monthly) 4-2
1.2 Replacing ionizer discharge needle (2-year) 4-3
2. UPS (Uninterruptible Power Supply) 4-4
2.1 Replacing UPS battery (3-year) 4-4
3. Nozzle station 4-5
3.1 Checking and cleaning nozzle sensor (1-year) 4-5
Chapter 5 Lubrication points
1. Lubrication preparations 5-1
1.1 Compatible grease 5-1
1.2 Grease gun 5-2
2. Lubrication points/schedule (Main machine) 5-3
2.1 X-axis 5-3
2.2 Y-axis 5-4
2.3 W-axis (U-axis) 5-5
2.3.1 Dual-stage type 5-5
2.3.2 Dual-lane type 5-6
2.3.3 Single-lane type 5-7
2.4 PU-axis 5-8
2.4.1 Dual-stage type 5-8
2.4.2 Dual-lane type 5-9
2.4.3 Single-lane type 5-10
2.5 Head unit 5-11
2.5.1 HM head unit 5-11
2.5.2 FM head unit 5-12
Chapter 6 How to replace consumable parts
1. Nozzle 6-1
1.1 Replacing the nozzle tip and spring 6-1
1.2 Replacing the nozzle O-ring 6-2
2. Nozzle leaf springs and roller lock 6-3
2.1 Replacing nozzle leaf springs 6-3
2.1.1 HM head 6-3
2.1.2 FM head 6-5
2.2 FM head: Replacing the roller lock 6-6
3. Head unit 6-7
3.1 HM head: Replacing the valves 6-7
3.2 FM head: Replacing the valves 6-9
4. Conveyor 6-10
4.1 Replacing the conveyor belt 6-10
Appendix
1. Specifications A-1
1.1 Air regulator unit A-1
1.2 Power connection terminals A-2
1.3 Connection between machines A-3
1.3.1 PREVIOUS INTERFACE connector A-3
1.3.2 NEXT INTERFACE connector A-4
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Introduction
Contents
1. About this manual i
2. Maintenance list ii