YSM20_YSM20W_Mainte_E.pdf - 第40页
1-8 1 Maintenance 2.2 Replaceable par ts T he replacement parts shown here are for parts which could cause mac hine stops if they fail or if they cease to function properly due to their life expiration. No mac hine adjus…
1-7
1
Maintenance
Consumable parts (main unit/base)
Optional purchase parts
Conveyor belt (for entrance and exit)
Conveyor with dual-stage typeConveyor with single-lane type
Conveyor belt (for W2 and W3)
Air filter Oil mist filter
Mist filter element
Filter element
Air/mist filter
Conveyor belt
(for single-lane/dual-lane)
Air intake filter
* Viewed from the rear side of a machine
Air intake filter for YSM20
Air intake filter for YSM20W
* 2 each for front and rear
Air intake filter (Machine rear side)
Air intake filter (Control box)
53110-N2-10
1-8
1
Maintenance
2.2 Replaceable parts
The replacement parts shown here are for parts which could cause machine stops if they fail or if they cease to
function properly due to their life expiration. No machine adjustments are required after replacing these parts.
The replacement procedures are explained below.
2.2.1 HM head unit
Replaceable parts
HM head (Figure showing the cover, connector, and air hose detached)
Blow valve for cleaning
Blow valve
Operation valve
Bit cap
Ejector bit
Muffler
Filter cap
Spare ejector
(Cut part type)
Spare ejector
(Molded part type)
53103-N2-10
Product Name Parts List Designation Parts No. Note
Blow valve VALVE KLF-M7152-00X For ejector blow
Operation valve VALVE KLF-M7153-00X For ejector vacuum generation
Ejector bit BIT KLW-M7154-00X
Recommended replacement, Approx. 2 years
Do not reuse the bit.
Bit cap BIT CAP KLW-M7156-00X
Muffler MUFFLER KLW-M715A-00X Muffler inside the bit cap
Blow valve for cleaning VALVE KLW-M7158-00X
Filter cap FILTER CAP KLW-M7155-00X
Spare ejector EJECTOR KLW-M7157-00X
Cut part type
Valve and ejector unit for one head
Spare ejector EJECTOR KLW-M7157-10X
Molded part type
Valve and ejector unit for one head
c
CAUTION
The base structure (cut part type/molded part type) of the spare ejector (valve and ejector unit for one head) may
vary depending on the machine shipment timing. Be aware that two kinds of types cannot be mixed in one machine.
When ordering the spare ejector, check the part shape of your machine or contact YAMAHA sales representatives.
c
CAUTION
The parts (parts Nos.) in this manual are at the time of issuing this manual. The parts Nos. may be changed without
prior notice. Make sure to verify the latest parts Nos. before ordering.
1-9
1
Maintenance
2.2.2 FM head unit
Replaceable parts
FM head (Figure showing the cover, connector, and air hose detached)
Blow valve
for cleaning
Blow valve
Operation valve
Bit cap
Muffler
Ejector bit
Spare ejector
(Cut part type)
Spare ejector
(Molded part type)
Filter cap
53104-N2-10
Product Name Parts List Designation Parts No. Note
Blow valve VALVE KLF-M7152-00X For ejector blow
Operation valve VALVE KLF-M7153-00X For ejector vacuum generation
Ejector bit BIT KLW-M7154-00X
Recommended replacement, Approx. 2 years
Do not reuse the bit.
Bit cap BIT CAP KLW-M7156-00X
Muffler MUFFLER KLW-M715A-00X Muffler inside the bit cap
Blow valve for cleaning VALVE KLW-M7158-00X
Filter cap FILTER CAP KLW-M7155-00X
Spare ejector EJECTOR KLW-M7157-00X
Cut part type
Valve and ejector unit for one head
Spare ejector EJECTOR KLW-M7157-10X
Molded part type
Valve and ejector unit for one head
c
CAUTION
The base structure (cut part type/molded part type) of the spare ejector (valve and ejector unit for one head) may
vary depending on the machine shipment timing. Be aware that two kinds of types cannot be mixed in one machine.
When ordering the spare ejector, check the part shape of your machine or contact YAMAHA sales representatives.
c
CAUTION
The parts (parts Nos.) in this manual are at the time of issuing this manual. The parts Nos. may be changed without
prior notice. Make sure to verify the latest parts Nos. before ordering.