TR7500_Series_Software_v29_En - 第119页

Test Research Inc. TR7500 Series User Guide – Software v.2.9.0 97 Figure 160 : Fiducial Settin g Screen  [Set Fiducial 0 Position] – Move the camera on f iducial 0 and press [OK]. Figure 161 : Move Camera t o Fiducial M…

Test Research Inc.

96 TR7500 Series User Guide –Software v.2.9.0

 [Cam0] – Select the top camera to grab image.

 Grabbing – Check to start capturing the image.

(4) Alignment area

 [Alignment] – Select to show the cross line on image.

 The other functions are selected for camera alignment.

(5) Others

 [SaveImage] – Press the button to save the current image in the folder where the

project is saved. If you don’t open the project the image will be saved in [C:\AOI]

folder.

 [Cancel] – Close the window.

 [OK] – Close the window and save settings.

3.10.2 Capture Panel Map

Recapture the panel map by selecting this item. The map file will be saved in the same folder

where the project is saved. The file names are “Model Name.bmp”(backup file “Map.bmp”)

and “Model Name_2X2.bmp” (backup file “Map2X2.bmp”).

3.10.3 Capture FOV Images

Recapture the FOV images by selecting this item. The image file will be saved in the same

folder where the project is saved. The name is “FovImage”.

3.10.4 Capture FOV Images with Multi-Panel

This is a future feature. It is currently unavailable. It will allow capture and saving of several

FOV images for [Offline Tune Mode].

3.10.5 Fiducial Mark Alignment

Selecting this item causes the X-Y Table to move to find the fiducial mark. If the system can’t

find the fiducial mark, a warning message appears (below). Repeat the process to find the

fiducial mark.

Figure 159: Fiducial Mark Not Found Message

3.10.6 Fiducial Mark Setting

Set the position and search range for fiducial mark 0. If the relative position of two fiducial

marks has been changed, find the fiducial marks again using the ATPG flow.

Test Research Inc.

TR7500 Series User Guide –Software v.2.9.0 97

Figure 160: Fiducial Setting Screen

 [Set Fiducial 0 Position] – Move the camera on fiducial 0 and press [OK].

Figure 161: Move Camera to Fiducial Mark

Test Research Inc.

98 TR7500 Series User Guide –Software v.2.9.0

Figure 162: Confirm Change Fiducial Mark Position

 [Set Fiducial 0 Search Range] – Adjust the green box in the center of the image to

meet the search range, then press [OK].

Figure 163: Adjust Fiducial Mark Search Range

 Click on [DONE].