TR7500_Series_Software_v29_En - 第303页

Test Research Inc. TR7500 Series User Guide – Software v.2.9.0 281 Figure 473 : Histogram Curv e

Test Research Inc.

280 TR7500 Series User Guide –Software v.2.9.0

  Front Camera – [ON] means to review the FOVs and the FOVs display as yellow

boxes; [OFF] means not to review and the yellow boxes disappear.

  Rear Camera – [ON] means to review the FOVs and the FOVs display as orange

boxes; [OFF] means not to review and the orange boxes disappear.

  Left Camera – [ON] means to review the FOVs and the FOVs display as purple

boxes; [OFF] means not to review and the purple boxes disappear.

  Right Camera – [ON] means to review the FOVs and the FOVs display as blue

boxes; [OFF] means not to review and the blue boxes disappear.

11.9.8 Merge

Click on [Merge] to merge the specific library with a component. After merging, FOV images

should be captured again (refer to

3.10.3).

Merge Steps:

Step1. Press [Merge] and a library window appears. The detailed functions are in

8.1.2.

Select a library and press [OK].

Step2. Input the object component type or name then press [OK].

Figure 472: Merge Library Dialog

 [Type] – Select the object type. The check box means merge the library to all

components with the type.

 [Component] – To merge the library to a single component, do not select the

check box and choose a component.

 [Over Write] – Select to overwrite the data or it just merge the component don’t

have inspection boxes.

Step3. Capture FOV images again.

11.9.9 Histogram

The histogram curve displays the distribution of gray levels in the multi-function window. The

horizontal axis is the gray level; the vertical axis refers to the pixel counts. The red line

means the gray level where the mouse cursor is.

Test Research Inc.

TR7500 Series User Guide –Software v.2.9.0 281

Figure 473: Histogram Curve

Test Research Inc.

282 TR7500 Series User Guide –Software v.2.9.0

11.9.10 Change Lighting

11.9.10.1 Move to FOV Position

Selecting the check box means move the camera to the position of the FOV that is currently

being viewed. Change and save the lighting.

Not selecting the check box means capture the image at the current position. The lighting

can be changed for testing, but cannot be saved.

11.9.10.2 Set Lighting

Set the lighting for the FOV. The way to set lighting is in 7

Figure 474: Change FOV Lighting

 [For Multi FOV] -- set the light for related FOVs in the other boards in a multi-board

panel.

 [For Current FOV] -- only set the light for the current FOV.