00193325-01 - 第26页
3 Graphical user int erface SIPLACE Software Guide SR.503.xx 3.2 Components of the user interface Issue 12/01 EN 26 3 Fig. 3.2 - 3 „Conveyor 1: PCB in processing conveyor 1" dialog (Example: S25-HM) Click th e che…
SIPLACE Software Guide SR.503.xx 3 Graphical user interface
Issue 12/01 EN 3.2 Components of the user interface
25
Continue processing 3
This icon is displayed after „Stop processing PCB“ or after a machine stop.
(The triangles in the icon move continuously from left to right.)
Click this icon to continue the interrupted operation once the error has been successfully
eliminated. 3
3
Click the icon.
Processing is now continued.
3
Processing PCB 3
The PCB has been taken up by the system and is being processed. The PCB icon is blue-green
in color. 3
Processing of PCB stopped 3
If processing of the PCB has been interrupted using „Stop processing PCB“ or by an error
which caused a machine standstill or interrupted as a result of the Stop button being pressed, the
PCB icon is again displayed as a button and is blue-green in color.
3
Processing can be continued by clicking on the icon. 3
NOTE
The procedure used to abort processing is described below. 3
Abort processing PCB (S-25 HM) 3
3
Click the appropriate PCB icon.
If the PCB is located on the processing conveyor, the following dialog box is opened.
3 Graphical user interface SIPLACE Software Guide SR.503.xx
3.2 Components of the user interface Issue 12/01 EN
26
3
Fig. 3.2 - 3 „Conveyor 1: PCB in processing conveyor 1" dialog (Example: S25-HM)
Click the checkbox „Abort processing PCB“.
Click the Accept button.
Processing of the PCB is aborted.
The incompletely assembled PCB is transported to the output conveyor and the operator is re-
quested to remove it by hand.
If the PCB is located on the input conveyor, the following dialog box is opened. 3
3
Fig. 3.2 - 4 „Conveyor 1: PCB in input conveyor“ dialog (Example: S25-HM)
Click the checkbox „Abort processing PCB“.
SIPLACE Software Guide SR.503.xx 3 Graphical user interface
Issue 12/01 EN 3.2 Components of the user interface
27
Click the Accept button.
Processing of the PCB is aborted.
The printed circuit board that has not been processed in this machine is transported onto the
output conveyor, and the operator is prompted to remove the board manually.
Abort processing PCB (HS-50) 3
3
Click the corresponding PCB icon .
If the PCB is located on the processing conveyor 2, the following dialog box is opened.
3
Fig. 3.2 - 5 „Conveyor 1: PCB in processing conveyor 2" dialog (Example: HS-50)
Click the checkbox "Abort processing PCB".
Click the Accept button.
Processing of the PCB is aborted.
The incompletely assembled PCB is transported to the output conveyor and the operator is re-
quested to remove it by hand.
If the PCB is located on processing conveyor 1, the following dialog box is opened.