00193325-01 - 第40页

3 Graphical user int erface SIPLACE Software Guide SR.503.xx 3.3 User interf ace - views and menus Issue 12/01 E N 40 3.3.2.3 „ Options“ menu The "Opti ons" menu is o nly ava ilable i n the m ain view. This men…

SIPLACE Software Guide SR.503.xx 3 Graphical user interface

Issue 12/01 EN 3.3 User interface - views and menus

Matrix-tray changer (only for S-25 HM) 3

In order to move to the view for the Siplace Matrix-tray changer you must click the 3

button (Location 1 or Location 3).

Or, from the "View" menu, select the "Feeder" function, and activate the button for MTC in the

dialog displayed. The following window opens.

Fig. 3.3 - 3 "Matrix Tray Changer" view (S-25 HM)

Key to Fig. 3.3 - 3

(1) Cassette number

(2) Tower number

(3) Level number

(4) Selects the "MTC" view.

(5) Help system for the topic „MTC“

You will find a detailed description of the MTC in the Station Operating Manual. Please refer to the

Online Help for parameter descriptions..

3 Graphical user interface SIPLACE Software Guide SR.503.xx

3.3 User interface - views and menus Issue 12/01 EN

3.3.2.3 „Options“ menu

The "Options" menu is only available in the main view. This menu contains all the supplementary

functions. 3

 Click the required menu item and then make the appropriate settings or selections in the cor-

responding windows or dialog boxes.

Machine options... (HS-50) 3

Depending on access level, you can obtain information about the station configuration ("Opera-

tor") or activate or deactivate the displayed machine options ("Line engineer", "Service"). 3

 Click the Machine options... menu item (or the appropriate button in the working area of the

main view). The following window is displayed.

Fig. 3.3 - 4 „Machine options - entire machine“ dialog box (Example: HS-50)

NOTE

Only those machine options are displayed which are configured at the current station. 3

SIPLACE Software Guide SR.503.xx 3 Graphical user interface

Issue 12/01 EN 3.3 User interface - views and menus

 Click the checkboxes corresponding to the machine options which you want to activate or de-

activate.

When the machine is switched off, all options are reset except those listed below:

– Comp. verification with barcode

– Feeder position recognition

– PCB data transfer from PA1(„Whispering Down the line“)

NOTE

At "Operator" access level, it is only possible to activate and deactivate the conveyor interface op-

tions. 3

 If you want to activate or deactivate the options for a processing area or view its configuration,

click the Processing area 1 or Processing area 2 tab to select the required area.

The display switches to the selected processing area (see example below for PA1).

Fig. 3.3 - 5 „Machine options - Processing area 1" dialog box (Example: HS50)

 Activate/deactivate the checkboxes corresponding to the required machine options.

 Click Accept to save the settings.

Machine options... (S25-HM) 3

Depending on access level, you can obtain information about the station configuration ("Opera-

tor") or activate or deactivate the displayed machine options ("Line engineer", "Service"). 3