00193325-01 - 第45页
SIPLACE S oftware Guide SR.503.xx 3 Graphical user i nterface Issue 12/01 E N 3.3 User interface - views and menus 45 Control mode.. . 3 The con trol mod e determi nes ho w the station i s suppl ied with th e nece ssary …
3 Graphical user interface SIPLACE Software Guide SR.503.xx
3.3 User interface - views and menus Issue 12/01 EN
44
Example of initial password allocation 3
3
Fig. 3.3 - 8 "Change line engineer password - initial allocation" dialog box
Click the "New password" text box and enter the required password.
Click the "Confirm password" text box and re-enter the password.
Click the OK button to confirm the password.
Example for the modification of an existing password 3
3
Fig. 3.3 - 9 „Change line engineer password - change an existing password“ dialog box
Click the "Old password" text box and enter the current password.
The other two text boxes now become active.
Click the "New password" text box and enter the new password.
Click the "Confirm password" text box and enter the new password for a second time.
Click the OK button to confirm the password.
Click OK to close the "Access level" dialog box.
SIPLACE Software Guide SR.503.xx 3 Graphical user interface
Issue 12/01 EN 3.3 User interface - views and menus
45
Control mode... 3
The control mode determines how the station is supplied with the necessary placement data. 3
Click the Control mode... menu item.
The „Control mode“ dialog box is displayed.
3
Fig. 3.3 - 10 "Control mode" dialog box
Control modes: 3
Stand Alone (for test purposes only)
This mode allows you to load a cluster (placement program) for test and service purposes from
the station computer using the "New cluster..." menu item.
The necessary data must be located on the station computer’s hard disk. The machine runs with-
out a higher-level computer. 3
GEM Host (not available in this version of the software)
In this mode, clusters can only be specified by the host computer.
The necessary data must be located on the host computer’s hard disk. 3
NOTE
This setting must be activated if you want to download cluster data from the host computer to the
station computer via the GEM interface. 3
3 Graphical user interface SIPLACE Software Guide SR.503.xx
3.3 User interface - views and menus Issue 12/01 EN
46
Line computer
If a cluster has been prespecified at the station, all the necessary associated data is loaded from
the line computer. The data must be located on the line computer’s hard disk. 3
Synchronous Restart 3
If the connection between line computer and station is disrupted during running operation,
a dialog containing the corresponding information is displayed. After reboot of the line
computer under a running station, the communication between line computer and station is re-
sumed, and the dialog closes automatically. 3
3
SIPLACE Pro
Establishes the connection to the SIPLACE Pro programming system. 3
3
Activate the radio button for the required control mode.
Click OK to make your settings active.
New cluster... 3
In „Stand alone“ mode, you can load the data for a selected cluster from the station computer’s
hard disk. 3
Click the New cluster... menu item. When using a single conveyor, the following dialog ap-
pears:
3
Fig. 3.3 - 11 „Enter new cluster“ dialog box for single conveyor
Now enter the name of the required cluster in the displayed text box and click OK to confirm.
The cluster data is now loaded.