Infinity DI.pdf - 第12页
INFINITY TECHNI CAL REFEREN CE MECH ANICA L DETAIL Chapter Issu e 4 Aug 01 Infinity Dual Imag e Manual 1.7 Dual Image Scree n The machine is capable of printing in both single and dua l image modes, the dimensions in the…
1.6 Infinity Dual Image Manual Chapter Issue 4 Aug 01
INFINITY
TECHNICAL REFERENCE
MECHANICAL DETAIL
Screens The screens used in the machine can be single image or dual image. When dual
image mode is used, screens with runner adaptors are used (see also ‘Adapting
a 29 inch screen’).
Runner Adaptor The runner adaptor set comprises two runners that are fitted to both sides of the
screen. The standard screen used for printing has a printable image area of
508mm x 508mm (20 x 20 inches), as the screen needs to shuttle front to back
in a dual image print operation the adaptors are fitted and the printable area is
reduced
Figure 1-5 Runner Adaptor
INFINITY
TECHNICAL REFERENCE
MECHANICAL DETAIL
Chapter Issue 4 Aug 01 Infinity Dual Image Manual 1.7
Dual Image Screen The machine is capable of printing in both single and dual image modes, the
dimensions in the drawing below show the dual image screen only. For single
image screens refer to the Screens and Screen Images chapter of the Infinity
Technical Reference Manual.
Figure 1-6 Dual Image Screen
1.8 Infinity Dual Image Manual Chapter Issue 4 Aug 01
INFINITY
TECHNICAL REFERENCE
MECHANICAL DETAIL
Customised Screens NOTE
Customers that use non standard stencils or wish to adapt a stencil should
contact DEK Customer support for details regarding the correct dimensions.