Infinity DI.pdf - 第22页

INFINITY TECHNI CAL REFEREN CE SEQUEN CES Chapter Issu e 4 Aug 01 Infinity Dual Imag e Manual 1.17 14. The screen is mov ed to the location determined by the product f ile. 15. The screen clamps engage to clamp the scr e…

100%1 / 70
1.16 Infinity Dual Image Manual Chapter Issue 4 Aug 01
INFINITY
TECHNICAL REFERENCE
SEQUENCES
Screen Shuttle Sequence (Auto Load) - Image at the Front
Automatic Load - Bar Code Reader Option (BCR)
Ensure that the correct boards for printing are loaded into the feeder.
1. Turn the printing machine on and initialize.
2. Set up the product files, set the tooling and load the screen (The chase
actuators disengage).
3. Select Auto from the mode option on the status page.
4. Select Run.
5. The screen shuttle actuators move the screen in the chase until the sensor at
the rear detects the presence of the screen.
6. The screen shuttle actuators (rear) engage the screen at the rear, the actuators
are coupled and the front actuators engage to grip the screen. The screen is
moved forward
7. The shuttle actuators disengage the screen and move forward to allow the
rear actuators to engage in the slot to clamp the screen.
8. The front left actuator releases and the right hand actuators fully engage to
allow the screen to be pushed to the left.
9. The first board in the batch is fed to the bar code reader. The reader has a
sensor mounted before it that detects the board, this acts as a trigger to bring
the BCR on.
10.The label is read and the product file is compared to enable the machine to
be set up for the product.
11.The board continues travel on the inroad conveyor until it reaches the
conveyor sensor where it stops.
12.The board present sensor confirms that the board has arrived at the correct
location.
13.As the board details have been confirmed by the BCR, the machine starts the
shuttle action of the screen.
Figure 1-11 Load Sequence Front Image - Bar Code Reader Option
INFINITY
TECHNICAL REFERENCE
SEQUENCES
Chapter Issue 4 Aug 01 Infinity Dual Image Manual 1.17
14. The screen is moved to the location determined by the product file.
15. The screen clamps engage to clamp the screen.
Normal board to screen alignment takes place.
Figure 1-12 Load Sequence Front Image - Bar Code Reader Option (continued)
1.18 Infinity Dual Image Manual Chapter Issue 4 Aug 01
INFINITY
TECHNICAL REFERENCE
SEQUENCES
Screen Shuttle Sequence (Auto Load)
Product Sensor
Option
Ensure that the correct boards for printing are loaded into the feeder
1. Turn the printing machine on and initialize.
2. Set up the product files, set the tooling and load the screen (The chase
actuators disengage).
3. Select Auto from the mode option on the status page.
4. Select Run.
5. The screen shuttle actuators move the screen in the chase until the sensor at
the rear detects the presence of the screen.
6. The screen shuttle actuators (rear) engage the screen at the rear, the actuators
are coupled and the front actuators engage to grip the screen. The screen is
moved forward.
7. The shuttle actuators disengage the screen and move forward to allow the
rear actuators to engage in the slot to clamp the screen.
8. The front left actuator releases and the right hand actuators fully engage to
allow the screen to be pushed to the left.
9. The first board in the batch is fed to the inroad conveyor sensor and stops.
10.The machine interrogates the board present sensor to check that the board
has arrived at the correct position for loading.
11.If the presence of a board is also detected by the product sensor it switches
on and the product file for this type is loaded.
12.As the board details have been confirmed, the machine starts the shuttle
action of the screen.