00197288-02_AI_TBO_SX12_V2_DE_EN - 第44页

2 Brief Description 2.5 Tools and Equipment Required 44 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V2 Thick Board Option Option Dicke Leiterplatte 02/2019 2.5 Tools and Equipment Required T Standard tooling…

2 Brief Description

2.1 Product Description

Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V2 Thick Board Option Option Dicke Leiterplatte

02/2019

2 Brief Description

The "Thick Board" option enables you to place boards with a thickness up to 6.5mm.

2.1 Product Description

The "Thick Board" option is needed in order to process boards with a thickness up to 6.5mm.

You also need to use other clamping rails and will have to lower the entire conveyor.

2.2 Prerequisites

This option can be fitted in all SX1/SX2 V2 machines from serial number Lxxxx.

NOTICE

Other machine types

► For machines of type SX1/SX2/DX1/DX2 (serial number Kxxxx), read the Assembly

Instructions "Thick Board 6mm – SX1/SX2 – DE+EN" [00196613‑xx].

2.3 Restrictions

●

Once you have installed this option, you will no longer be able to clamp boards with a thick-

ness of below 2 mm.

●

Both conveyor lanes need to be converted when using a dual conveyor. If you do not convert

both sides, the Z axis for the placement heads will not reach far enough down and the PCB fi-

ducials will be outside the focus of the PCB camera.

2.4 Scope of Delivery

"Thick Board option SX1/SX2 V2" [00519871-xx] package (for one conveyor lane)

NOTICE

Dual Conveyor

The package contains all parts needed to convert one conveyor lane. You will need to order

this package 2x for a dual conveyor.

Quantity Designation Item no.

2 Clamping rail for thick board SX1a assembly 03099567-xx

4 ISO 14581 M5x25-8.8, chem. nickel-plated 03095127-xx

4 ISO 14581 M5x14.7-8.8, chem. nickel-plated 03098065-xx

1 Warning sign no. W208 03009347-xx

1 Assembly instructions “Thick Board Option" (DE+EN) (this docu-

ment)

00197288-xx

2 Washer for clamping plate 03091791-xx

2 Clamping plate washer 03091711-xx

2 DIN 7991 - M4x8-A2-70 03047055- xx

4 Setting screw 3mm SXa 03104139-xx

4 U-distance 2mm 03104937-xx

4 U-distance 5mm 03104924-xx

2 Brief Description

2.5 Tools and Equipment Required

44 Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V2 Thick Board Option Option Dicke Leiterplatte

02/2019

2.5 Tools and Equipment Required

T Standard tooling

T 03079617-xx Depth measuring gauge 300mm

Service manual for your machine

2.6 Required Working Time

●

The complete installation for the single conveyor will take approx. 1.5 hours.

●

The complete installation for the dual conveyor will take approx. 2.5 hours.

●

Programming work on the SIPLACE Pro computer may also be needed.

3 Installation

3.1 Overview of Conveyor for SX1/SX2 V2

Assembly Instructions / Montageanleitung SIPLACE SX1/SX2 V2 Thick Board Option Option Dicke Leiterplatte

02/2019

3 Installation

CAUTION

Do not loosen or remove the wrong screws

The following applies to all work performed on the conveyor:

► Make sure that you do not loosen or remove any other screws except those ones ex-

plicitly mentioned. Loosening or removing other screws could lead to irreparable mis-

alignment or damage to the conveyor rail.

NOTICE

Single and dual conveyor

The installation is described using the example of the dual conveyor. Installation on a single

conveyor follows the same procedure. Any relevant differences will be mentioned explicitly.

3.1 Overview of Conveyor for SX1/SX2 V2

Your placement machine is either fitted with the single or dual conveyor, depending on the config-

uration.

3.1.1 Single Conveyor

Fig.5: Single conveyor

1. Input area

2. Placement area

3. Width Adjustment

4. Output area

5. Conveyor control TSP420 (under the

cover)

6. Lifting table

7. Sensor rail (on the conveyor rail)

3.1.2 Dual Conveyor

Fig.6: Dual conveyor

1. Input area

2. Width adjustment in the input area

3. Placement area

4. Lifting table

5. Width adjustment in the output area

6. Output area

7. Sensor rail (on the conveyor rail)

8. 2x conveyor control TSP420 (under the

covers)

9. Conveyor lane 1

10. Conveyer lane 2

The dual conveyor has two conveyor lanes. In the standard version, the fixed conveyor rail of each

conveyor lane is on the right-hand side.