00198328-01_AI_Basic Pack Vakuum Tooling_TX_DE_EN.pdf - 第68页

4 Appendix 4.4 Overview 68 Montageanleitung / Assembly Instructions SIPLACE TX-Serie Basic Pack Vacuum Tooling 07/2017 4.4 Overview

4 Appendix

4.1 Excerpts from the Service Manual

Montageanleitung / Assembly Instructions SIPLACE TX-Serie Basic Pack Vacuum Tooling 07/2017 67

4 Appendix

4.1 Excerpts from the Service Manual

The following chapters are excerpts from the service manual for your machine. If required, further

information is provided there.

●

Service Manual SIPLACE TX-Series [DE:00198149‑xx] [EN:00198150‑xx]

4.2 Circuit Diagrams

For more information, refer to the circuit diagrams folder:

●

Detailed circuit diagrams folder for SIPLACE TX-Series (up to no. 499) [DE+EN: 00197933-

xx]

●

Detailed circuit diagrams folder for SIPLACE TX-Series (from no. 500) [DE+EN: 00198274-xx]

4.3 Cable Overview

4.3.1 Connectors Location 2

1. Connectors to vacuum switch at the corner cover

2. Connectors to valves for vacuum distribution

4.3.2 X34 Connectors Conveyor Control

1. Socket at the side of location 2

2. Socket lane 1 in the plate below conveyor lane 1

3. Socket lane 2 in the plate below conveyor lane 2

4. X34 connector conveyor control lane 2

5. X34 connector conveyor control lane 1

4 Appendix

4.4 Overview

68 Montageanleitung / Assembly Instructions SIPLACE TX-Serie Basic Pack Vacuum Tooling 07/2017

4.4 Overview