CP6的IO代码

Manual Updat e Notice The fol lowing ma nual has bee n revised and re -re l eased: Manual title: CP-6-se ries Me chanical Refer ence Manual number (u pdated edi tion ): MEC-C P6S-1.4E Manual number (p revious edition ): …

Manual Update Notice

The following manual has been revised and re-released:

Manual title: CP-6-series Mechanical Reference

Manual number (updated edition): MEC-CP6S-1.4E

Manual number (previous edition): MEC-CP6S-1.3E

Date of issue: March 24, 2003

The main changes that have been made are detailed in the table below.

Part and chapter Summary of changes

Safety Guidelines Revised.

Part 10 Carrier Type Loading

System

3.1 Adjustment of the In-Carrier

Open/Close Limit Sensors

5.1 Adjustment of the Out-

Carrier Open/Close Limit

Sensors

A value in the In- and Out-carrier close limit sensor

adjustment procedure was corrected.

Note:

For a hard copy of the manual, contact your nearest Fuji sales representative or

send an e-mail request to the address below.

E-mail : intnetqst@fuji.co.jp

CP-6-series

Mechanical Reference

CP-6/6E

CP-6M/6ME

CP-642/642E

CP-642M/642ME

CP-643E

CP-643ME

CP-65/65E

CP-652CE

MEC-CP6S-1.4E

Copyrights

All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This manual

may not, in whole or in part, be reproduced by any means (electronic, mechanical or otherwise), or

reused in any way, without the prior written permission of Fuji Machine Manufacturing Co., Ltd.

Trademark Rights

is a trademark of Fuji Machine Manufacturing Co., Ltd., and registered in the

following countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Indonesia,

Ireland, Italy, Japan, Korea, Luxembourg, the Netherlands, Portugal, Spain, Sweden, the U.K., and the

U.S.A.

Warranty and Liability

Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for situations that may arise due to

any of the following:

• The use of third party parts.

• The use of non-genuine Fuji parts.

• Incorrect settings made by the customer.

• Improper use of Fuji equipment.

Notice

• Fuji Machine Manufacturing Co., Ltd. reserves the right to change the content of this manual

without notice.

• Every effort has been made to ensure that this manual is correct in every detail. However,

please contact Fuji in the unlikely event that errors or omissions are detected.

• Fuji Machine Manufacturing Co., Ltd. accepts no liability whatsoever for damages that may

arise as a result of this manual, with the exception of problems that originate in our products.